Aiways U5

Drivetrain parameters

The Aiways U5 has 8 drivetrain parameters.

● Confirmed◆ In testing○ Supported× Not supported

How to read a parameter card

Actual motor speed U5_MOTOR_RPMConfirmed

  • Request22 20 03
  • Service 22DID 2003
  • Module704
  • Every1 s
  • Testing for 2019 to 2020, 2022

Example reply from a 2023 Aiways U5.

Bits 0 to 15 of the reply, 16 bits. The value is signed.

0x0000 = 0 → 0 rpm

Formula
val
Range
-15000 to 15000 rpm
Unit
rpm

Confirmed for 2021, 2023. In testing for 2019 to 2020, 2022.

  1. The parameter's name and its ID in the OBDb. Confirmed shows when a response from a real car confirms the parameter.
  2. The clutch mark shows a Connectable, a parameter that Pelican surfaces in its interface.
  3. The service and PID/DID asked for, the control module it's sent to, and how often Pelican asks.
  4. The reply's bytes. The parameter's bytes are blue. Bytes for other parameters in the same reply are grayed out. Hover over a byte to see the parameter it represents.
  5. Where the parameter is in the response, and how Pelican converts the raw value into a value.
  6. A real reply, decoded. The raw value comes first, then the reading.
  7. Which model years have tested this parameter.

Actual motor speed U5_MOTOR_RPMConfirmed

  • Request22 20 03
  • Service 22DID 2003
  • Module704
  • Every1 s
  • Testing for 2019 to 2020, 2022

Example reply from a 2023 Aiways U5.

Bits 0 to 15 of the reply, 16 bits. The value is signed.

0x0000 = 0 → 0 rpm

Formula
val
Range
-15000 to 15000 rpm
Unit
rpm

Confirmed for 2021, 2023. In testing for 2019 to 2020, 2022.

Available drive torque U5_AVAIL_TORQUEConfirmed

  • Request22 20 12
  • Service 22DID 2012
  • Module704
  • Every1 s
  • Testing for 2019 to 2020, 2022

Example reply from a 2023 Aiways U5.

Bits 0 to 15 of the reply, 16 bits.

0x1402 = 5122 → (5122 ÷ 16) = 320.125 N·m

Formula
(val ÷ 16)
Range
0 to 500 N·m
Unit
N·m

Confirmed for 2021, 2023. In testing for 2019 to 2020, 2022.

Commanded motor speed U5_CMD_SPEEDConfirmed

  • Request22 20 0F
  • Service 22DID 200F
  • Module704
  • Every1 s
  • Testing for 2019 to 2020, 2022

Example reply from a 2023 Aiways U5.

Bits 0 to 15 of the reply, 16 bits. The value is signed.

0x0000 = 0 → 0 rpm

Formula
val
Range
-17000 to 17000 rpm
Unit
rpm

Confirmed for 2021, 2023. In testing for 2019 to 2020, 2022.

Commanded torque U5_CMD_TORQUEConfirmed

  • Request22 20 0E
  • Service 22DID 200E
  • Module704
  • Every1 s
  • Testing for 2019 to 2020, 2022

Example reply from a 2023 Aiways U5.

Bits 0 to 15 of the reply, 16 bits. The value is signed.

0x0000 = 0 → (0 ÷ 16) = 0 N·m

Formula
(val ÷ 16)
Range
-500 to 500 N·m
Unit
N·m

Confirmed for 2021, 2023. In testing for 2019 to 2020, 2022.

MCU temperature 1 U5_MCU_T1Confirmed

  • Request22 20 08
  • Service 22DID 2008
  • Module704
  • Every5 s
  • Testing for 2019 to 2020, 2022

Bits 0 to 15 of the reply, 16 bits. The value is signed.

Formula
(val ÷ 64)
Range
-40 to 200 °C
Unit
°C

Confirmed for 2021, 2023. In testing for 2019 to 2020, 2022.

MCU temperature 2 U5_MCU_T2Confirmed

  • Request22 20 09
  • Service 22DID 2009
  • Module704
  • Every5 s
  • Testing for 2019 to 2020, 2022

Bits 0 to 15 of the reply, 16 bits. The value is signed.

Formula
(val ÷ 64)
Range
-40 to 200 °C
Unit
°C

Confirmed for 2021, 2023. In testing for 2019 to 2020, 2022.

Stator temperature U5_STATOR_TConfirmed

  • Request22 20 07
  • Service 22DID 2007
  • Module704
  • Every5 s
  • Testing for 2019 to 2020, 2022

Bits 0 to 15 of the reply, 16 bits. The value is signed.

Formula
(val ÷ 64)
Range
-40 to 200 °C
Unit
°C

Confirmed for 2021, 2023. In testing for 2019 to 2020, 2022.

Torque U5_TORQUEConfirmed

  • Request22 20 04
  • Service 22DID 2004
  • Module704
  • Every1 s
  • Testing for 2019 to 2020, 2022

Example reply from a 2023 Aiways U5.

Bits 0 to 15 of the reply, 16 bits. The value is signed.

0x0000 = 0 → (0 ÷ 16) = 0 N·m

Formula
(val ÷ 16)
Range
-500 to 500 N·m
Unit
N·m

Confirmed for 2021, 2023. In testing for 2019 to 2020, 2022.

Keyboard shortcuts

jk/↓↑
Move down or up through a list or a grid.
hl/←→
Move across a row or between cards.
Enter
Open the focused link.
f
Open the current focus area's filter.
↓
In a filter, move to the first result.
Esc
Close a filter or a dialog.
?
Show these shortcuts.