Pelican
Get the app

Audi e-tron

Stat parameters

The Audi e-tron has 1 stat parameter.

● Confirmed◆ In testing○ Supported× Not supported

How to read a parameter card

Launch control count ETRON_LAUNCHConfirmed

How many times you've initiated launch control on the car.

  • Request22 52 00
  • Service 22DID 5200
  • Module7E5 → 7ED
  • Every3600 s
  • Testing for 2019 to 2021, 2023 to 2024

Example reply from a 2026 Audi e-tron.

Bits 0 to 31 of the reply, 32 bits.

0x00000001 = 1 → 1

Formula
val
Range
0 to 1000000
Unit
Number

Confirmed for 2022, 2026. In testing for 2023 to 2024. Not supported for 2019 to 2021.

  1. The parameter's name and its ID in the OBDb. Confirmed shows when a response from a real car confirms the parameter.
  2. The clutch mark shows a Connectable, a parameter that Pelican surfaces in its interface.
  3. The service and PID/DID asked for, the control module it's sent to, and how often Pelican asks.
  4. The reply's bytes. The parameter's bytes are blue. Bytes for other parameters in the same reply are grayed out. Hover over a byte to see the parameter it represents.
  5. Where the parameter is in the response, and how Pelican converts the raw value into a value.
  6. A real reply, decoded. The raw value comes first, then the reading.
  7. Which model years have tested this parameter.

Launch control count ETRON_LAUNCHConfirmed

How many times you've initiated launch control on the car.

  • Request22 52 00
  • Service 22DID 5200
  • Module7E5 → 7ED
  • Every3600 s
  • Testing for 2019 to 2021, 2023 to 2024

Example reply from a 2026 Audi e-tron.

Bits 0 to 31 of the reply, 32 bits.

0x00000001 = 1 → 1

Formula
val
Range
0 to 1000000
Unit
Number

Confirmed for 2022, 2026. In testing for 2023 to 2024. Not supported for 2019 to 2021.

Start your test drive today.

Download Pelican on the App Store

See all featuresCompare plansJoin the beta crew

Keyboard shortcuts

jk/↓↑
Move down or up through a list or a grid.
hl/←→
Move across a row or between cards.
Enter
Open the focused link.
f
Open the current focus area's filter.
↓
In a filter, move to the first result.
Esc
Close a filter or a dialog.
?
Show these shortcuts.