Pelican
Get the app

Audi RS 3

Stat parameters

The Audi RS 3 has 8 stat parameters.

● Confirmed◆ In testing○ Supported× Not supported

How to read a parameter card

Crashes, driver side RS3_CRASH_CNT_DRVR

  • Request22 23 54
  • Service 22DID 2354
  • Module715
  • Every3600 s
  • Testing

Bits 0 to 7 of the reply, 8 bits.

Formula
val
Range
0 to 255
Unit
Number

In testing for 2011 to 2012, 2015 to 2017, 2019 to 2021, 2025 to 2026. Not supported for 2018, 2022 to 2024.

  1. The parameter's name and its ID in the OBDb. Confirmed shows when a response from a real car confirms the parameter.
  2. The clutch mark shows a Connectable, a parameter that Pelican surfaces in its interface.
  3. The service and PID/DID asked for, the control module it's sent to, and how often Pelican asks.
  4. The reply's bytes. The parameter's bytes are blue. Bytes for other parameters in the same reply are grayed out. Hover over a byte to see the parameter it represents.
  5. Where the parameter is in the response, and how Pelican converts the raw value into a value.
  6. A real reply, decoded. The raw value comes first, then the reading.
  7. Which model years have tested this parameter.

Crashes, driver side RS3_CRASH_CNT_DRVR

  • Request22 23 54
  • Service 22DID 2354
  • Module715
  • Every3600 s
  • Testing

Bits 0 to 7 of the reply, 8 bits.

Formula
val
Range
0 to 255
Unit
Number

In testing for 2011 to 2012, 2015 to 2017, 2019 to 2021, 2025 to 2026. Not supported for 2018, 2022 to 2024.

Crashes, passenger side RS3_CRASH_CNT_PSNGR

  • Request22 23 55
  • Service 22DID 2355
  • Module715
  • Every3600 s
  • Testing

Bits 0 to 7 of the reply, 8 bits.

Formula
val
Range
0 to 255
Unit
Number

In testing for 2011 to 2012, 2015 to 2017, 2019 to 2021, 2025 to 2026. Not supported for 2018, 2022 to 2024.

Crashes, rear RS3_CRASH_CNT_REAR

  • Request22 23 56
  • Service 22DID 2356
  • Module715
  • Every3600 s
  • Testing

Bits 0 to 7 of the reply, 8 bits.

Formula
val
Range
0 to 255
Unit
Number

In testing for 2011 to 2012, 2015 to 2017, 2019 to 2021, 2025 to 2026. Not supported for 2018, 2022 to 2024.

Crashes, rollover RS3_CRASH_CNT_ROLL

  • Request22 23 57
  • Service 22DID 2357
  • Module715
  • Every3600 s
  • Testing

Bits 0 to 7 of the reply, 8 bits.

Formula
val
Range
0 to 255
Unit
Number

In testing for 2011 to 2012, 2015 to 2017, 2019 to 2021, 2025 to 2026. Not supported for 2018, 2022 to 2024.

Driving time (eco) RS3_DRIVE_TIME_ECO

Value may be wrong, needs more validation. Proportion of time spent driving in eco mode

  • Request22 03 03
  • Service 22DID 0303
  • Module7E1
  • Every900 s
  • Testing

Bits 0 to 7 of the reply, 8 bits.

Formula
(val ÷ 2.5)
Range
0 to 100 %
Unit
%

In testing for 2011 to 2012, 2015 to 2017, 2019 to 2021, 2025 to 2026. Not supported for 2018, 2022 to 2024.

Driving time (manual) RS3_DRIVE_TIME_MANUAL

Value may be wrong, needs more validation. Proportion of time spent driving in manual mode

  • Request22 03 05
  • Service 22DID 0305
  • Module7E1
  • Every900 s
  • Testing

Bits 0 to 7 of the reply, 8 bits.

Formula
(val ÷ 2.5)
Range
0 to 100 %
Unit
%

In testing for 2011 to 2012, 2015 to 2017, 2019 to 2021, 2025 to 2026. Not supported for 2018, 2022 to 2024.

Driving time (sport) RS3_DRIVE_TIME_SPORT

Value may be wrong, needs more validation. Proportion of time spent driving in sport mode

  • Request22 03 04
  • Service 22DID 0304
  • Module7E1
  • Every900 s
  • Testing

Bits 0 to 7 of the reply, 8 bits.

Formula
(val ÷ 2.5)
Range
0 to 100 %
Unit
%

In testing for 2011 to 2012, 2015 to 2017, 2019 to 2021, 2025 to 2026. Not supported for 2018, 2022 to 2024.

Total drive time RS3_DRIVE_TIME

  • Request22 03 02
  • Service 22DID 0302
  • Module7E1
  • Every900 s
  • Testing

Bits 0 to 15 of the reply, 16 bits.

Formula
(val ÷ 4)
Range
0 to 16383 h
Unit
h

In testing for 2011 to 2012, 2015 to 2017, 2019 to 2021, 2025 to 2026. Not supported for 2018, 2022 to 2024.

Start your test drive today.

Download Pelican on the App Store

See all featuresCompare plansJoin the beta crew

Keyboard shortcuts

jk/↓↑
Move down or up through a list or a grid.
hl/←→
Move across a row or between cards.
Enter
Open the focused link.
f
Open the current focus area's filter.
↓
In a filter, move to the first result.
Esc
Close a filter or a dialog.
?
Show these shortcuts.