DTC parameters
The Audi S3 has 6 DTC parameters.
● Confirmed◆ In testing○ Supported× Not supported
Distance traveled since diagnostic trouble codes cleared AUDI_CLR_DISTConfirmed
Pelican can show this parameter as the distance since trouble codes were cleared.
- Request
22 F4 31 - Service 22
DID F431 - Module
7E0 → 7E8 - Every
30 s - Testing
Example reply from a 2018 Audi S3.
Bits 0 to 15 of the reply, 16 bits.
0x0E53 = 3667 → 3,667 km
- Formula
val- Range
- 0 to 65535 km
- Unit
- km
Confirmed for 2016, 2018. In testing for 1999 to 2003, 2006 to 2012, 2014 to 2015, 2017, 2019 to 2026.
Distance traveled since diagnostic trouble codes cleared CLR_DISTSAE J1979Confirmed
Distance accumulated since DTCs were cleared (via an external test equipment or possibly, a battery disconnect). This parameter is not associated with any particular DTC. It is simply an indication for inspection/maintenance, of the last time an external test equipment was used to clear DTCs. If greater than 65,535 km have occurred, will remain at 65,535 km and not wrap to zero.
Pelican can show this parameter as the distance since trouble codes were cleared.
- Request
01 31 - Service 01
PID 31 - Module
7E0 → 7E8 - Every
15 s
Bits 0 to 15 of the reply, 16 bits.
- Formula
val- Range
- 0 to 65535 km
- Unit
- km
Confirmed for 2016, 2018. Supported for 2017, 2019, 2022 to 2023.
Distance traveled while mil was activated AUDI_MIL_DISTConfirmed
- Request
22 F4 21 - Service 22
DID F421 - Module
7E0 → 7E8 - Every
30 s - Testing
Example reply from a 2018 Audi S3.
Bits 0 to 15 of the reply, 16 bits.
0x0000 = 0 → 0 km
- Formula
val- Range
- 0 to 65535 km
- Unit
- km
Confirmed for 2016, 2018. In testing for 1999 to 2003, 2006 to 2012, 2014 to 2015, 2017, 2019 to 2026.
Distance traveled while MIL was activated MIL_DISTSAE J1979Confirmed
Resets to zero when MIL changes from deactivated to activated, if diagnostic information is cleared, or if at least 40 warm-up cycles occur without MIL being activated.
- Request
01 21 - Service 01
PID 21 - Module
7E0 → 7E8 - Every
5 s
Bits 0 to 15 of the reply, 16 bits.
- Formula
val- Range
- 0 to 65535 km
- Unit
- km
Confirmed for 2016. Supported for 2017 to 2019, 2022 to 2023.
Number of warm-ups since diagnostic trouble codes cleared AUDI_WARM_UPSConfirmed
- Request
22 F4 30 - Service 22
DID F430 - Module
7E0 → 7E8 - Every
3600 s - Testing
Example reply from a 2018 Audi S3.
Bits 0 to 7 of the reply, 8 bits.
0x13 = 19 → 19
- Formula
val- Range
- 0 to 255
- Unit
- Number
Confirmed for 2016, 2018. In testing for 1999 to 2003, 2006 to 2012, 2014 to 2015, 2017, 2019 to 2026.
Number of warm-ups since diagnostic trouble codes cleared WARM_UPSSAE J1979Confirmed
Number of OBD warm-up cycles since all DTCs were cleared (via an external test equipment or possibly, a battery disconnect). A warm-up is defined in the OBD regulations to be sufficient vehicle operation such that coolant temperature rises by at least 22°C (40°F) from engine starting and reaches a minimum temperature of 70°C (160°F) (60°C (140°F) for diesels). This PID is not associated with any particular DTC. It is simply an indication for inspection/maintenance, of the last time an external test equipment was used to clear DTCs. If greater than 255 warm-ups have occurred, this parameter will remain at 255 and not wrap to zero.
- Request
01 30 - Service 01
PID 30 - Module
7E0 → 7E8 - Every
60 s
Bits 0 to 7 of the reply, 8 bits.
- Formula
val- Range
- 0 to 255
- Unit
- Number
Confirmed for 2016. Supported for 2017 to 2019, 2022 to 2023.
