Jaguar F-TYPE

Fuel parameters

The Jaguar F-TYPE has 3 fuel parameters.

● Confirmed◆ In testing○ Supported× Not supported

How to read a parameter card

Fuel rail pressure JAGUAR_FUEL_RAIL_P

  • Request22 16 70
  • Service 22DID 1670
  • Module7E0 → 7E8
  • Every1 s
  • Testing

Bits 0 to 15 of the reply, 16 bits.

Formula
(val × 78125 ÷ 10000)
Range
0 to 511992.1875 kPa
Unit
kPa

In testing for 2013 to 2024.

  1. The parameter's name and its ID in the OBDb. Confirmed shows when a response from a real car confirms the parameter.
  2. The clutch mark shows a Connectable, a parameter that Pelican surfaces in its interface.
  3. The service and PID/DID asked for, the control module it's sent to, and how often Pelican asks.
  4. The reply's bytes. The parameter's bytes are blue. Bytes for other parameters in the same reply are grayed out. Hover over a byte to see the parameter it represents.
  5. Where the parameter is in the response, and how Pelican converts the raw value into a value.
  6. A real reply, decoded. The raw value comes first, then the reading.
  7. Which model years have tested this parameter.

Fuel rail pressure JAGUAR_FUEL_RAIL_P

  • Request22 16 70
  • Service 22DID 1670
  • Module7E0 → 7E8
  • Every1 s
  • Testing

Bits 0 to 15 of the reply, 16 bits.

Formula
(val × 78125 ÷ 10000)
Range
0 to 511992.1875 kPa
Unit
kPa

In testing for 2013 to 2024.

Fuel rail temperature JAGUAR_FUEL_RAIL_T

  • Request22 16 8E
  • Service 22DID 168E
  • Module7E0 → 7E8
  • Every1 s
  • Testing

Bits 0 to 7 of the reply, 8 bits. The value is signed.

Formula
(val × 48 ÷ 100)
Range
-61.44 to 60.96 °C
Unit
°C

In testing for 2013 to 2024.

Fuel tank level JAGUAR_FLI

Pelican can show this parameter as the fuel tank level.

  • Request22 16 C1
  • Service 22DID 16C1
  • Module7E0 → 7E8
  • Every1 s
  • Testing

Bits 0 to 15 of the reply, 16 bits.

Formula
(val × 200 ÷ 65535)
Range
0 to 100 %
Unit
%

In testing for 2013 to 2024.

Keyboard shortcuts

jk/↓↑
Move down or up through a list or a grid.
hl/←→
Move across a row or between cards.
Enter
Open the focused link.
f
Open the current focus area's filter.
↓
In a filter, move to the first result.
Esc
Close a filter or a dialog.
?
Show these shortcuts.