Pelican
Get the app

Jeep Wrangler

Movement parameters

The Jeep Wrangler has 2 movement parameters.

● Confirmed◆ In testing○ Supported× Not supported

How to read a parameter card

Odometer at last overspeed recognition WRANGLER_ODO_LAST_OVERSPEED

  • Request22 20 07
  • Service 22DID 2007
  • Module7E0 → 7E8
  • Every3600 s
  • Testing

Bits 0 to 23 of the reply, 24 bits.

Formula
(val ÷ 10)
Range
0 to 1677721.5 km
Unit
km

In testing for 1988 to 2006, 2009 to 2011, 2014 to 2015, 2017, 2019 to 2020, 2022 to 2023, 2026. Not supported for 2007 to 2008, 2012 to 2013, 2016, 2018, 2021, 2024 to 2025.

  1. The parameter's name and its ID in the OBDb. Confirmed shows when a response from a real car confirms the parameter.
  2. The clutch mark shows a Connectable, a parameter that Pelican surfaces in its interface.
  3. The service and PID/DID asked for, the control module it's sent to, and how often Pelican asks.
  4. The reply's bytes. The parameter's bytes are blue. Bytes for other parameters in the same reply are grayed out. Hover over a byte to see the parameter it represents.
  5. Where the parameter is in the response, and how Pelican converts the raw value into a value.
  6. A real reply, decoded. The raw value comes first, then the reading.
  7. Which model years have tested this parameter.

Odometer at last overspeed recognition WRANGLER_ODO_LAST_OVERSPEED

  • Request22 20 07
  • Service 22DID 2007
  • Module7E0 → 7E8
  • Every3600 s
  • Testing

Bits 0 to 23 of the reply, 24 bits.

Formula
(val ÷ 10)
Range
0 to 1677721.5 km
Unit
km

In testing for 1988 to 2006, 2009 to 2011, 2014 to 2015, 2017, 2019 to 2020, 2022 to 2023, 2026. Not supported for 2007 to 2008, 2012 to 2013, 2016, 2018, 2021, 2024 to 2025.

Vehicle speed VSSSAE J1979Confirmed

Pelican can show this parameter as the speed.

  • Request01 0D
  • Service 01PID 0D
  • Module7E0 → 7E8
  • Every250 ms

Bits 0 to 7 of the reply, 8 bits.

Formula
val
Range
0 to 255 km/h
Unit
km/h

Confirmed for 2007 to 2022, 2024 to 2025. Supported for 2023.

Start your test drive today.

Download Pelican on the App Store

See all featuresCompare plansJoin the beta crew

Keyboard shortcuts

jk/↓↑
Move down or up through a list or a grid.
hl/←→
Move across a row or between cards.
Enter
Open the focused link.
f
Open the current focus area's filter.
↓
In a filter, move to the first result.
Esc
Close a filter or a dialog.
?
Show these shortcuts.