Pelican
Get the app

Subaru Outback

Light parameters

The Subaru Outback has 1 light parameter.

● Confirmed◆ In testing○ Supported× Not supported

How to read a parameter card

Stop light switch OUTBACK_STOP_LIGHT_SWITCHConfirmed

  • Request22 12 30
  • Service 22DID 1230
  • Module7A2 → 7AA
  • Every1 s
  • Testing for 1994 to 2012, 2014 to 2022

Example reply from a 2026 Subaru Outback.

Bits 0 to 7 of the reply, 8 bits.

0x00 = 0 → 0

Formula
val
Range
0 to 255
Unit
Number

Confirmed for 2023 to 2026. In testing for 1994 to 2010, 2012, 2014. Supported for 2013. Not supported for 2011, 2015 to 2022.

  1. The parameter's name and its ID in the OBDb. Confirmed shows when a response from a real car confirms the parameter.
  2. The clutch mark shows a Connectable, a parameter that Pelican surfaces in its interface.
  3. The service and PID/DID asked for, the control module it's sent to, and how often Pelican asks.
  4. The reply's bytes. The parameter's bytes are blue. Bytes for other parameters in the same reply are grayed out. Hover over a byte to see the parameter it represents.
  5. Where the parameter is in the response, and how Pelican converts the raw value into a value.
  6. A real reply, decoded. The raw value comes first, then the reading.
  7. Which model years have tested this parameter.

Stop light switch OUTBACK_STOP_LIGHT_SWITCHConfirmed

  • Request22 12 30
  • Service 22DID 1230
  • Module7A2 → 7AA
  • Every1 s
  • Testing for 1994 to 2012, 2014 to 2022

Example reply from a 2026 Subaru Outback.

Bits 0 to 7 of the reply, 8 bits.

0x00 = 0 → 0

Formula
val
Range
0 to 255
Unit
Number

Confirmed for 2023 to 2026. In testing for 1994 to 2010, 2012, 2014. Supported for 2013. Not supported for 2011, 2015 to 2022.

Start your test drive today.

Download Pelican on the App Store

See all featuresCompare plansJoin the beta crew

Keyboard shortcuts

jk/↓↑
Move down or up through a list or a grid.
hl/←→
Move across a row or between cards.
Enter
Open the focused link.
f
Open the current focus area's filter.
↓
In a filter, move to the first result.
Esc
Close a filter or a dialog.
?
Show these shortcuts.