Audi Q3

Fluid parameters

The Audi Q3 has 1 fluid parameter.

● Confirmed◆ In testing○ Supported× Not supported

How to read a parameter card

Oil thermal wear Q3_PQ35_OIL_WEARConfirmed

  • Request22 22 4B
  • Service 22DID 224B
  • Module714 → 77E
  • Every1 s
  • Testing for 2011 to 2012, 2014 to 2016, 2022, 2024, 2026

Example reply from a 2025 Audi Q3.

Bits 0 to 15 of the reply, 16 bits.

0x00B9 = 185 → 185 km

Formula
val
Range
0 to 65535 km
Unit
km

Confirmed for 2013, 2017 to 2021, 2023, 2025. In testing for 2011 to 2012, 2014 to 2016, 2022, 2024, 2026.

  1. The parameter's name and its ID in the OBDb. Confirmed shows when a response from a real car confirms the parameter.
  2. The clutch mark shows a Connectable, a parameter that Pelican surfaces in its interface.
  3. The service and PID/DID asked for, the control module it's sent to, and how often Pelican asks.
  4. The reply's bytes. The parameter's bytes are blue. Bytes for other parameters in the same reply are grayed out. Hover over a byte to see the parameter it represents.
  5. Where the parameter is in the response, and how Pelican converts the raw value into a value.
  6. A real reply, decoded. The raw value comes first, then the reading.
  7. Which model years have tested this parameter.

Oil thermal wear Q3_PQ35_OIL_WEARConfirmed

  • Request22 22 4B
  • Service 22DID 224B
  • Module714 → 77E
  • Every1 s
  • Testing for 2011 to 2012, 2014 to 2016, 2022, 2024, 2026

Example reply from a 2025 Audi Q3.

Bits 0 to 15 of the reply, 16 bits.

0x00B9 = 185 → 185 km

Formula
val
Range
0 to 65535 km
Unit
km

Confirmed for 2013, 2017 to 2021, 2023, 2025. In testing for 2011 to 2012, 2014 to 2016, 2022, 2024, 2026.

Keyboard shortcuts

jk/↓↑
Move down or up through a list or a grid.
hl/←→
Move across a row or between cards.
Enter
Open the focused link.
f
Open the current focus area's filter.
↓
In a filter, move to the first result.
Esc
Close a filter or a dialog.
?
Show these shortcuts.