Pelican
Get the app

Audi Q5

DTC parameters

The Audi Q5 has 4 DTC parameters.

● Confirmed◆ In testing○ Supported× Not supported

How to read a parameter card

Distance traveled since diagnostic trouble codes cleared AUDI_CLR_DISTConfirmed

Pelican can show this parameter as the distance since trouble codes were cleared.

  • Request22 F4 31
  • Service 22DID F431
  • Module7E0 → 7E8
  • Every30 s
  • Testing

Example reply from a 2022 Audi Q5.

Bits 0 to 15 of the reply, 16 bits.

0x0200 = 512 → 512 km

Formula
val
Range
0 to 65535 km
Unit
km

Confirmed for 2015, 2018 to 2022. In testing for 2008 to 2014, 2016 to 2017, 2023 to 2026.

  1. The parameter's name and its ID in the OBDb. Confirmed shows when a response from a real car confirms the parameter.
  2. The clutch mark shows a Connectable, a parameter that Pelican surfaces in its interface.
  3. The service and PID/DID asked for, the control module it's sent to, and how often Pelican asks.
  4. The reply's bytes. The parameter's bytes are blue. Bytes for other parameters in the same reply are grayed out. Hover over a byte to see the parameter it represents.
  5. Where the parameter is in the response, and how Pelican converts the raw value into a value.
  6. A real reply, decoded. The raw value comes first, then the reading.
  7. Which model years have tested this parameter.

Distance traveled since diagnostic trouble codes cleared AUDI_CLR_DISTConfirmed

Pelican can show this parameter as the distance since trouble codes were cleared.

  • Request22 F4 31
  • Service 22DID F431
  • Module7E0 → 7E8
  • Every30 s
  • Testing

Example reply from a 2022 Audi Q5.

Bits 0 to 15 of the reply, 16 bits.

0x0200 = 512 → 512 km

Formula
val
Range
0 to 65535 km
Unit
km

Confirmed for 2015, 2018 to 2022. In testing for 2008 to 2014, 2016 to 2017, 2023 to 2026.

Distance traveled since diagnostic trouble codes cleared CLR_DISTSAE J1979Confirmed

Distance accumulated since DTCs were cleared (via an external test equipment or possibly, a battery disconnect). This parameter is not associated with any particular DTC. It is simply an indication for inspection/maintenance, of the last time an external test equipment was used to clear DTCs. If greater than 65,535 km have occurred, will remain at 65,535 km and not wrap to zero.

Pelican can show this parameter as the distance since trouble codes were cleared.

  • Request01 31
  • Service 01PID 31
  • Module7E0 → 7E8
  • Every15 s

Bits 0 to 15 of the reply, 16 bits.

Formula
val
Range
0 to 65535 km
Unit
km

Confirmed for 2015, 2018 to 2022. Supported for 2010, 2012, 2016.

Distance traveled while mil was activated AUDI_MIL_DISTConfirmed

  • Request22 F4 21
  • Service 22DID F421
  • Module7E0 → 7E8
  • Every30 s
  • Testing

Example reply from a 2022 Audi Q5.

Bits 0 to 15 of the reply, 16 bits.

0x0000 = 0 → 0 km

Formula
val
Range
0 to 65535 km
Unit
km

Confirmed for 2015, 2018 to 2022. In testing for 2008 to 2014, 2016 to 2017, 2023 to 2026.

Number of warm-ups since diagnostic trouble codes cleared AUDI_WARM_UPSConfirmed

  • Request22 F4 30
  • Service 22DID F430
  • Module7E0 → 7E8
  • Every3600 s
  • Testing

Example reply from a 2022 Audi Q5.

Bits 0 to 7 of the reply, 8 bits.

0x06 = 6 → 6

Formula
val
Range
0 to 255
Unit
Number

Confirmed for 2015, 2018 to 2022. In testing for 2008 to 2014, 2016 to 2017, 2023 to 2026.

Start your test drive today.

Download Pelican on the App Store

See all featuresCompare plansJoin the beta crew

Keyboard shortcuts

jk/↓↑
Move down or up through a list or a grid.
hl/←→
Move across a row or between cards.
Enter
Open the focused link.
f
Open the current focus area's filter.
↓
In a filter, move to the first result.
Esc
Close a filter or a dialog.
?
Show these shortcuts.