Pelican
Get the app

BMW 2 Series

Fluid parameters

The BMW 2 Series has 1 fluid parameter.

● Confirmed◆ In testing○ Supported× Not supported

How to read a parameter card

Distance since last oil change 2SERIES_OIL_CHANGE_DIST

  • Request22 DF E7
  • Service 22DID DFE7
  • Module6F1 → 619
  • Every1 s
  • Testing

Bits 304 to 335 of the reply, 32 bits.

Formula
val
Range
0 to 1000000 km
Unit
km

In testing for 2014, 2021, 2026. Not supported for 2009, 2015 to 2020, 2022 to 2025.

  1. The parameter's name and its ID in the OBDb. Confirmed shows when a response from a real car confirms the parameter.
  2. The clutch mark shows a Connectable, a parameter that Pelican surfaces in its interface.
  3. The service and PID/DID asked for, the control module it's sent to, and how often Pelican asks.
  4. The reply's bytes. The parameter's bytes are blue. Bytes for other parameters in the same reply are grayed out. Hover over a byte to see the parameter it represents.
  5. Where the parameter is in the response, and how Pelican converts the raw value into a value.
  6. A real reply, decoded. The raw value comes first, then the reading.
  7. Which model years have tested this parameter.

Distance since last oil change 2SERIES_OIL_CHANGE_DIST

  • Request22 DF E7
  • Service 22DID DFE7
  • Module6F1 → 619
  • Every1 s
  • Testing

Bits 304 to 335 of the reply, 32 bits.

Formula
val
Range
0 to 1000000 km
Unit
km

In testing for 2014, 2021, 2026. Not supported for 2009, 2015 to 2020, 2022 to 2025.

Start your test drive today.

Download Pelican on the App Store

See all featuresCompare plansJoin the beta crew

Keyboard shortcuts

jk/↓↑
Move down or up through a list or a grid.
hl/←→
Move across a row or between cards.
Enter
Open the focused link.
f
Open the current focus area's filter.
↓
In a filter, move to the first result.
Esc
Close a filter or a dialog.
?
Show these shortcuts.