Pelican
Get the app

BMW 7 Series

Fluid parameters

The BMW 7 Series has 1 fluid parameter.

● Confirmed◆ In testing○ Supported× Not supported

How to read a parameter card

Distance since last oil change 7SERIES_OIL_CHANGE_DISTConfirmed

  • Request22 DF E7
  • Service 22DID DFE7
  • Module6F1 → 619
  • Every1 s
  • Testing for 1988 to 2016, 2018 to 2019, 2021 to 2026

Example reply from a 2020 BMW 7 Series.

Bits 304 to 335 of the reply, 32 bits.

0x00019992 = 104850 → 104,850 km

Formula
val
Range
0 to 1000000 km
Unit
km

Confirmed for 2017, 2020. In testing for 1988 to 2010, 2013 to 2016, 2018 to 2019, 2021 to 2026. Not supported for 2011 to 2012.

  1. The parameter's name and its ID in the OBDb. Confirmed shows when a response from a real car confirms the parameter.
  2. The clutch mark shows a Connectable, a parameter that Pelican surfaces in its interface.
  3. The service and PID/DID asked for, the control module it's sent to, and how often Pelican asks.
  4. The reply's bytes. The parameter's bytes are blue. Bytes for other parameters in the same reply are grayed out. Hover over a byte to see the parameter it represents.
  5. Where the parameter is in the response, and how Pelican converts the raw value into a value.
  6. A real reply, decoded. The raw value comes first, then the reading.
  7. Which model years have tested this parameter.

Distance since last oil change 7SERIES_OIL_CHANGE_DISTConfirmed

  • Request22 DF E7
  • Service 22DID DFE7
  • Module6F1 → 619
  • Every1 s
  • Testing for 1988 to 2016, 2018 to 2019, 2021 to 2026

Example reply from a 2020 BMW 7 Series.

Bits 304 to 335 of the reply, 32 bits.

0x00019992 = 104850 → 104,850 km

Formula
val
Range
0 to 1000000 km
Unit
km

Confirmed for 2017, 2020. In testing for 1988 to 2010, 2013 to 2016, 2018 to 2019, 2021 to 2026. Not supported for 2011 to 2012.

Start your test drive today.

Download Pelican on the App Store

See all featuresCompare plansJoin the beta crew

Keyboard shortcuts

jk/↓↑
Move down or up through a list or a grid.
hl/←→
Move across a row or between cards.
Enter
Open the focused link.
f
Open the current focus area's filter.
↓
In a filter, move to the first result.
Esc
Close a filter or a dialog.
?
Show these shortcuts.