Pelican
Get the app

Cadillac CTS

Orientation parameters

The Cadillac CTS has 2 orientation parameters.

● Confirmed◆ In testing○ Supported× Not supported

How to read a parameter card

Lateral acceleration CADILLAC_LAT_G

  • Request22 4C 2F
  • Service 22DID 4C2F
  • ModuleDA28 → 2AF128
  • Every100 ms
  • Testing

Bits 0 to 15 of the reply, 16 bits. The value is signed.

Formula
(val × 15.92796725 ÷ 10000)
Range
-52 to 52 g
Unit
g

In testing for 2003 to 2006, 2008 to 2015, 2017 to 2019. Not supported for 2007, 2016.

  1. The parameter's name and its ID in the OBDb. Confirmed shows when a response from a real car confirms the parameter.
  2. The clutch mark shows a Connectable, a parameter that Pelican surfaces in its interface.
  3. The service and PID/DID asked for, the control module it's sent to, and how often Pelican asks.
  4. The reply's bytes. The parameter's bytes are blue. Bytes for other parameters in the same reply are grayed out. Hover over a byte to see the parameter it represents.
  5. Where the parameter is in the response, and how Pelican converts the raw value into a value.
  6. A real reply, decoded. The raw value comes first, then the reading.
  7. Which model years have tested this parameter.

Lateral acceleration CADILLAC_LAT_G

  • Request22 4C 2F
  • Service 22DID 4C2F
  • ModuleDA28 → 2AF128
  • Every100 ms
  • Testing

Bits 0 to 15 of the reply, 16 bits. The value is signed.

Formula
(val × 15.92796725 ÷ 10000)
Range
-52 to 52 g
Unit
g

In testing for 2003 to 2006, 2008 to 2015, 2017 to 2019. Not supported for 2007, 2016.

Longitudinal acceleration CADILLAC_LNG_G

  • Request22 4C 30
  • Service 22DID 4C30
  • ModuleDA28 → 2AF128
  • Every100 ms
  • Testing

Bits 0 to 15 of the reply, 16 bits. The value is signed.

Formula
(val × 15.92796725 ÷ 10000)
Range
-52 to 52 g
Unit
g

In testing for 2003 to 2006, 2008 to 2019. Not supported for 2007.

Start your test drive today.

Download Pelican on the App Store

See all featuresCompare plansJoin the beta crew

Keyboard shortcuts

jk/↓↑
Move down or up through a list or a grid.
hl/←→
Move across a row or between cards.
Enter
Open the focused link.
f
Open the current focus area's filter.
↓
In a filter, move to the first result.
Esc
Close a filter or a dialog.
?
Show these shortcuts.