Control parameters
The Cupra Leon has 46 control parameters.
● Confirmed◆ In testing○ Supported× Not supported
Absolute pedal position, drive CUPRA_APP_DConfirmed
- Request
22 F4 49 - Service 22
DID F449 - Module
746 → 7B0 - Every
1 s - Testing
Example reply from a 2024 Cupra Leon.
Bits 0 to 7 of the reply, 8 bits.
0x00 = 0 → (0 ÷ 2.55) = 0 %
- Formula
(val ÷ 2.55)- Range
- 0 to 100 %
- Unit
- %
Confirmed for 2020 to 2021, 2023 to 2024. In testing for 2022. Not supported for 2025 to 2026.
Absolute throttle position TPSAE J1979Confirmed
Throttle position at idle will usually be more than 0%, and throttle position at wide open throttle will usually be less than 100%.
Pelican can show this parameter as the throttle position.
- Request
01 11 - Service 01
PID 11 - Module
7E0 → 7E8 - Every
250 ms
Bits 0 to 7 of the reply, 8 bits.
- Formula
(val × 100 ÷ 255)- Range
- 0 to 100 %
- Unit
- %
Confirmed for 2023, 2026. Supported for 2020 to 2021, 2024 to 2025.
Absolute throttle position B TP_BSAE J1979Confirmed
Pelican can show this parameter as the throttle position.
- Request
01 47 - Service 01
PID 47 - Module
7E0 → 7E8 - Every
250 ms
Bits 0 to 7 of the reply, 8 bits.
- Formula
(val × 100 ÷ 255)- Range
- 0 to 100 %
- Unit
- %
Confirmed for 2023. Supported for 2021, 2025 to 2026.
Accelerator pedal position CUPRA_APP_PE
- Request
22 F4 49 - Service 22
DID F449 - Module
7E6 - Every
250 ms - Testing
Bits 0 to 7 of the reply, 8 bits.
- Formula
(val ÷ 2.55)- Range
- 0 to 100 %
- Unit
- %
In testing for 2020 to 2026.
Accelerator pedal position 1 CUPRA_APP1
- Request
22 F4 49 - Service 22
DID F449 - Module
7E0 → 7E8 - Every
250 ms - Testing
Bits 0 to 7 of the reply, 8 bits.
- Formula
(val ÷ 2.55)- Range
- 0 to 100 %
- Unit
- %
In testing for 2020 to 2026.
Accelerator pedal position 2 CUPRA_APP2
- Request
22 F4 4A - Service 22
DID F44A - Module
7E0 → 7E8 - Every
250 ms - Testing
Bits 0 to 7 of the reply, 8 bits.
- Formula
(val ÷ 2.55)- Range
- 0 to 100 %
- Unit
- %
In testing for 2020 to 2026.
Accelerator pedal release detection threshold voltage CUPRA_APP_REDUCE_V
- Request
22 10 29 - Service 22
DID 1029 - Module
7E0 → 7E8 - Every
250 ms - Testing
Bits 0 to 15 of the reply, 16 bits.
- Formula
(val ÷ 5)- Range
- 0 to 13107 mV
- Unit
- mV
In testing for 2020 to 2026.
Brake CUPRA_BRAKE_PRESSED
- Request
22 08 05 - Service 22
DID 0805 - Module
7E1 → 7E9 - Every
250 ms - Testing
Bit 6 of the reply.
- Formula
val- Range
- 0 to 1
- Unit
- Off or on
In testing for 2022. Not supported for 2020 to 2021, 2023 to 2026.
Brake booster low pressure, actual CUPRA_BRAKE_BOOSTER_LOW_P_ACT
- Request
22 14 90 - Service 22
DID 1490 - Module
7E0 → 7E8 - Every
250 ms - Testing
Bits 0 to 15 of the reply, 16 bits.
- Formula
(val × 39063 ÷ 1000000)- Range
- 0 to 2559.9937
- Unit
- Raw value
In testing for 2020 to 2026.
Brake booster pressure CUPRA_BRAKE_BOOSTER_P
- Request
22 11 CF - Service 22
DID 11CF - Module
7E0 → 7E8 - Every
250 ms - Testing
Bits 0 to 15 of the reply, 16 bits.
- Formula
(val × 19531 ÷ 500000)- Range
- 0 to 2559
- Unit
- Raw value
In testing for 2022. Not supported for 2020 to 2021, 2023 to 2026.
Brake booster pressure CUPRA_BRAKE_BOOSTER_P_V2
- Request
22 20 05 - Service 22
DID 2005 - Module
FC00 → FE0076 - Every
1 s - Testing
Bits 0 to 15 of the reply, 16 bits.
- Formula
(val ÷ 1000)- Range
- 0 to 65.535 bar
- Unit
- bar
In testing for 2020 to 2026.
Brake booster pressure CUPRA_BRAKE_BST_P
- Request
22 20 05 - Service 22
DID 2005 - Module
7E0 → 7E8 - Every
250 ms - Testing
Bits 0 to 15 of the reply, 16 bits.
- Formula
(val ÷ 1000)- Range
- 0 to 65.535 bar
- Unit
- bar
In testing for 2022. Not supported for 2020 to 2021, 2023 to 2026.
Brake booster pressure CUPRA_PQ35_BRAKE_BOOSTER_P
- Request
22 20 05 - Service 22
DID 2005 - Module
7E0 → 7E8 - Every
250 ms - Testing
Bits 0 to 15 of the reply, 16 bits.
- Formula
(val × 0.08291753)- Range
- 0 to 5434
- Unit
- Raw value
In testing for 2022. Not supported for 2020 to 2021, 2023 to 2026.
Brake booster raw pressure CUPRA_BRAKE_BOOSTER_RAW_P
- Request
22 11 D1 - Service 22
DID 11D1 - Module
7E0 → 7E8 - Every
250 ms - Testing
Bits 0 to 15 of the reply, 16 bits.
- Formula
val- Range
- 0 to 65535
- Unit
- Raw value
In testing for 2020 to 2026.
Brake booster, actual vacuum CUPRA_BRAKE_BOOSTER_ACT
- Request
22 14 90 - Service 22
DID 1490 - Module
7E0 → 7E8 - Every
250 ms - Testing
Bits 0 to 15 of the reply, 16 bits. The value is signed.
- Formula
(val ÷ 25)- Range
- -1310 to 1310
- Unit
- Raw value
In testing for 2020 to 2026.
Brake light CUPRA_BRAKE_LIGHT_ON
- Request
22 08 05 - Service 22
DID 0805 - Module
7E1 → 7E9 - Every
250 ms - Testing
Bit 7 of the reply.
- Formula
val- Range
- 0 to 1
- Unit
- Off or on
In testing for 2022. Not supported for 2020 to 2021, 2023 to 2026.
Brake light reading valid? CUPRA_BRAKE_LIGHT_ON_VALID
- Request
22 08 05 - Service 22
DID 0805 - Module
7E1 → 7E9 - Every
250 ms - Testing
Bit 4 of the reply.
- Formula
val- Range
- 0 to 1
- Unit
- No or yes
In testing for 2022. Not supported for 2020 to 2021, 2023 to 2026.
Brake pedal position CUPRA_BRAKE_PEDAL_POS
- Request
22 10 5D - Service 22
DID 105D - Module
7E0 → 7E8 - Every
250 ms - Testing
Bits 0 to 15 of the reply, 16 bits.
- Formula
(val × 12207 ÷ 1000000)- Range
- 0 to 100 %
- Unit
- %
In testing for 2020 to 2026.
Brake pressure CUPRA_BRAKE_P
- Request
22 2B 21 - Service 22
DID 2B21 - Module
713 → 77D - Every
1 s - Testing
Bits 0 to 15 of the reply, 16 bits. The value is signed.
- Formula
(val × 152999 ÷ 10000000 − 42.503)- Range
- -543.8501 to 458.8288 bar
- Unit
- bar
In testing for 2020 to 2026.
Brake pressure CUPRA_BRAKE_P_7E0
- Request
22 18 D0 - Service 22
DID 18D0 - Module
7E0 → 7E8 - Every
250 ms - Testing
Bits 0 to 15 of the reply, 16 bits. The value is signed.
- Formula
(val ÷ 100)- Range
- -327 to 327
- Unit
- Raw value
In testing for 2020 to 2026.
Brake pressure CUPRA_BRAKE_P_7E0_V2
- Request
22 19 5D - Service 22
DID 195D - Module
7E0 → 7E8 - Every
250 ms - Testing
Bits 0 to 15 of the reply, 16 bits. The value is signed.
- Formula
(val ÷ 100)- Range
- -327 to 327
- Unit
- Raw value
In testing for 2020 to 2026.
Brake pressure CUPRA_BRAKE_P_V2
- Request
22 10 5C - Service 22
DID 105C - Module
7E0 → 7E8 - Every
1 s - Testing
Bits 0 to 15 of the reply, 16 bits.
- Formula
(val ÷ 10)- Range
- 0 to 6553.5 bar
- Unit
- bar
In testing for 2020 to 2026.
Brake pressure CUPRA_BRAKE_PRES
- Request
22 10 5C - Service 22
DID 105C - Module
FC00 → FE0076 - Every
250 ms - Testing
Bits 0 to 15 of the reply, 16 bits. The value is signed.
- Formula
(val × 100 ÷ 10000)- Range
- -327.68 to 327.67
- Unit
- Raw value
In testing for 2020, 2022 to 2025. Not supported for 2021, 2026.
Brake pressure CUPRA_MQB_TCM_BRAKE_PConfirmed
- Request
22 38 03 - Service 22
DID 3803 - Module
7E1 → 7E9 - Every
250 ms - Testing
Example reply from a 2024 Cupra Leon.
Bits 0 to 15 of the reply, 16 bits. The value is signed. The bytes are in little-endian order.
0x0000 = 0 → (0 ÷ 100) = 0 bar
- Formula
(val ÷ 100)- Range
- -327.68 to 327.67 bar
- Unit
- bar
Confirmed for 2021, 2024. In testing for 2020, 2022. Not supported for 2023, 2025 to 2026.
Brake pressure CUPRA_PQ35_BRAKE_P
- Request
22 18 D0 - Service 22
DID 18D0 - Module
7E0 → 7E8 - Every
250 ms - Testing
Bits 0 to 15 of the reply, 16 bits. The value is signed.
- Formula
(val ÷ 100)- Range
- -327.68 to 327.67
- Unit
- Raw value
In testing for 2020, 2022. Not supported for 2021, 2023 to 2026.
Brake pressure reading valid? CUPRA_BRAKE_PRESSED_VALID
- Request
22 08 05 - Service 22
DID 0805 - Module
7E1 → 7E9 - Every
250 ms - Testing
Bit 5 of the reply.
- Formula
val- Range
- 0 to 1
- Unit
- No or yes
In testing for 2022. Not supported for 2020 to 2021, 2023 to 2026.
Brake system vacuum pump active CUPRA_BRAKE_SYSTEM_VACUUM
- Request
22 39 5E - Service 22
DID 395E - Module
7E0 → 7E8 - Every
1 s - Testing
Bits 0 to 7 of the reply, 8 bits.
- Formula
val- Range
- 0 to 255
- Unit
- Number
In testing for 2020 to 2026.
Brake vacuum pump CUPRA_ENG_BRAKE_PUMP
- Request
22 39 5E - Service 22
DID 395E - Module
7E0 → 7E8 - Every
1 s - Testing
Bit 7 of the reply.
- Formula
val- Range
- 0 to 1
- Unit
- Off or on
In testing for 2022. Not supported for 2020 to 2021, 2023 to 2026.
Directional stability control active CUPRA_CSS_ACT
- Request
22 18 B6 - Service 22
DID 18B6 - Module
713 → 77D - Every
5 s - Testing
Bit 6 of the reply.
- Formula
val- Range
- 0 to 1
- Unit
- Off or on
In testing for 2020 to 2026.
Directional stability control last activation distance CUPRA_CSS_ODO_LAST
- Request
22 18 B6 - Service 22
DID 18B6 - Module
713 → 77D - Every
5 s - Testing
Bits 8 to 31 of the reply, 24 bits.
- Formula
val- Range
- 0 to 1 km
- Unit
- km
In testing for 2020 to 2026.
Directional stability control steering torque CUPRA_CSS_STR_TRQ
- Request
22 18 B6 - Service 22
DID 18B6 - Module
713 → 77D - Every
5 s - Testing
Bits 32 to 47 of the reply, 16 bits.
- Formula
(val ÷ 1000)- Range
- 0 to 1 N·m
- Unit
- N·m
In testing for 2020 to 2026.
Downshift point adaptation voltage CUPRA_DOWNSHIFT_ADAPT_V
- Request
22 10 28 - Service 22
DID 1028 - Module
7E0 → 7E8 - Every
1 s - Testing
Bits 0 to 15 of the reply, 16 bits.
- Formula
(val ÷ 5)- Range
- 0 to 13107 mV
- Unit
- mV
In testing for 2020 to 2026.
Electronic differential lock: front left brake temperature CUPRA_EDL_FR_L_BRAKE_T
- Request
22 18 0C - Service 22
DID 180C - Module
713 → 77D - Every
5 s - Testing
Bits 8 to 23 of the reply, 16 bits. The value is signed.
- Formula
(val × 0.5)- Range
- -20 to 300 °C
- Unit
- °C
In testing for 2022. Not supported for 2020 to 2021, 2023 to 2026.
Electronic differential lock: front right brake temperature CUPRA_EDL_FR_R_BRAKE_T
- Request
22 18 0C - Service 22
DID 180C - Module
713 → 77D - Every
5 s - Testing
Bits 24 to 39 of the reply, 16 bits. The value is signed.
- Formula
(val × 0.5)- Range
- -20 to 300 °C
- Unit
- °C
In testing for 2022. Not supported for 2020 to 2021, 2023 to 2026.
Electronic differential lock: rear left brake temperature CUPRA_EDL_RR_L_BRAKE_T
- Request
22 18 0C - Service 22
DID 180C - Module
713 → 77D - Every
5 s - Testing
Bits 40 to 55 of the reply, 16 bits. The value is signed.
- Formula
(val × 0.5)- Range
- -20 to 300 °C
- Unit
- °C
In testing for 2022. Not supported for 2020 to 2021, 2023 to 2026.
Electronic differential lock: rear right brake temperature CUPRA_EDL_RR_R_BRAKE_T
- Request
22 18 0C - Service 22
DID 180C - Module
713 → 77D - Every
5 s - Testing
Bits 56 to 71 of the reply, 16 bits. The value is signed.
- Formula
(val × 0.5)- Range
- -20 to 300 °C
- Unit
- °C
In testing for 2022. Not supported for 2020 to 2021, 2023 to 2026.
Hydraulic brake booster: active CUPRA_HYD_BRAKE_BOOST_ACTIVE
- Request
22 18 10 - Service 22
DID 1810 - Module
713 → 77D - Every
2 s - Testing
Bit 6 of the reply.
- Formula
val- Range
- 0 to 1
- Unit
- Off or on
In testing for 2020 to 2026.
Parking brake, air gap - left CUPRA_PARKING_BRAKE_AIR
- Request
22 00 05 - Service 22
DID 0005 - Module
752 → 7BC - Every
250 ms - Testing
Bits 0 to 15 of the reply, 16 bits.
- Formula
(val ÷ 1000)- Range
- 0 to 65.53 mm
- Unit
- mm
In testing for 2020 to 2026.
Parking brake, air gap - right CUPRA_PARKING_BRAKE_AIR_GAP
- Request
22 00 05 - Service 22
DID 0005 - Module
752 → 7BC - Every
250 ms - Testing
Bits 16 to 31 of the reply, 16 bits.
- Formula
(val ÷ 1000)- Range
- 0 to 65.53 mm
- Unit
- mm
In testing for 2020 to 2026.
Pressure in brake servo unit CUPRA_P_BRAKE_SERVO_UNIT
- Request
22 20 05 - Service 22
DID 2005 - Module
713 → 77D - Every
1 s - Testing
Bits 0 to 15 of the reply, 16 bits. The value is signed.
- Formula
(val ÷ 16)- Range
- -2048 to 2047.9375
- Unit
- Raw value
In testing for 2020 to 2026.
Relative throttle position TP_RSAE J1979Confirmed
Relative or 'learned' throttle position.
- Request
01 45 - Service 01
PID 45 - Module
7E0 → 7E8 - Every
250 ms
Bits 0 to 7 of the reply, 8 bits.
- Formula
(val × 100 ÷ 255)- Range
- 0 to 100 %
- Unit
- %
Confirmed for 2023. Supported for 2021, 2024 to 2026.
Requested brake torque, auxiliary system CUPRA_REQ_BRAKE_TQ
- Request
22 16 10 - Service 22
DID 1610 - Module
7E0 → 7E8 - Every
250 ms - Testing
Bits 0 to 31 of the reply, 32 bits. The value is signed.
- Formula
(val ÷ 10)- Range
- -214748364 to 214748364 N·m
- Unit
- N·m
In testing for 2020 to 2026.
Steering wheel angle CUPRA_STEER_ANGLE
Positive is rotated to the left, negative is rotated to the right.
- Request
22 2B 29 - Service 22
DID 2B29 - Module
713 → 77D - Every
100 ms - Testing
Bits 0 to 15 of the reply, 16 bits. The value is signed.
- Formula
(val ÷ 1000)- Range
- -32.768 to 32.767 rad
- Unit
- rad
In testing for 2022. Not supported for 2020 to 2021, 2023 to 2026.
Steering wheel angle CUPRA_STEER_ANGLE_V2
- Request
22 03 46 - Service 22
DID 0346 - Module
FC00 → FE0076 - Every
250 ms - Testing
Bits 0 to 15 of the reply, 16 bits.
- Formula
(val ÷ 10)- Range
- 0 to 6553.5 °
- Unit
- °
In testing for 2022. Not supported for 2020 to 2021, 2023 to 2026.
Control › Pedals
Accelerator pedal position sensor 1 CUPRA_APP_POS1
- Request
22 20 61 - Service 22
DID 2061 - Module
7E0 → 7E8 - Every
250 ms - Testing
Bits 0 to 15 of the reply, 16 bits.
- Formula
(val ÷ 1000)- Range
- 0 to 65 V
- Unit
- V
In testing for 2022. Not supported for 2020 to 2021, 2023 to 2026.
Accelerator pedal position sensor 2 CUPRA_APP_POS2
- Request
22 20 62 - Service 22
DID 2062 - Module
7E0 → 7E8 - Every
250 ms - Testing
Bits 0 to 15 of the reply, 16 bits.
- Formula
(val ÷ 1000)- Range
- 0 to 65 V
- Unit
- V
In testing for 2022. Not supported for 2020 to 2021, 2023 to 2026.