Control parameters

The Dodge Charger has 9 control parameters.

● Confirmed◆ In testing○ Supported× Not supported

How to read a parameter card

High beam mode `CHARGER_HIGHBEAMS_MODE`Confirmed

Request22 03 2D
Service 22DID 032D
Module763 → 4E3
Every250 ms
Testing for 2016 to 2017, 2020, 2022 to 2026

Example reply from a 2021 Dodge Charger.

Bits 4 to 7 of the reply, 4 bits.

0b0000 = 0 → OFF

Unit: Named states

States
Raw value	State	Meaning
`0`	`OFF`	Off
`1`	`ON`	On
`2`	`HELD`	Held

Confirmed for 2015, 2018 to 2019, 2021. In testing for 2016 to 2017, 2020, 2022 to 2023. Not supported for 2006, 2013, 2026.

The parameter's name and its ID in the OBDb. Confirmed shows when a response from a real car confirms the parameter.
The clutch mark shows a Connectable, a parameter that Pelican surfaces in its interface.
The service and PID/DID asked for, the control module it's sent to, and how often Pelican asks.
The reply's bytes. The parameter's bytes are blue. Bytes for other parameters in the same reply are grayed out. Hover over a byte to see the parameter it represents.
Where the parameter is in the response, and how Pelican converts the raw value into a value.
A real reply, decoded. The raw value comes first, then the reading.
Which model years have tested this parameter.

Absolute throttle position `TP`SAE J1979Confirmed

Throttle position at idle will usually be more than 0%, and throttle position at wide open throttle will usually be less than 100%.

Pelican can show this parameter as the throttle position.

Request01 11
Service 01PID 11
Module7E0 → 7E8
Every250 ms

Bits 0 to 7 of the reply, 8 bits.

Formula: (val × 100 ÷ 255)
Range: 0 to 100 %
Unit: %

Confirmed for 2018 to 2019. Supported for 2006, 2011 to 2013, 2015 to 2017, 2021, 2023, 2026.

Absolute throttle position B `TP_B`SAE J1979Confirmed

Pelican can show this parameter as the throttle position.

Request01 47
Service 01PID 47
Module7E0 → 7E8
Every250 ms

Bits 0 to 7 of the reply, 8 bits.

Formula: (val × 100 ÷ 255)
Range: 0 to 100 %
Unit: %

Confirmed for 2019. Supported for 2026.

Brake booster pressure `CHARGER_BRAKE_BOOSTER_P`

Request22 09 44
Service 22DID 0944
Module7E0 → 7E8
Every250 ms
Testing

Bits 0 to 15 of the reply, 16 bits. The value is signed.

Formula: (val ÷ 100)
Range: -327.68 to 327.67 kPa
Unit: kPa

In testing for 2006 to 2023.

High beam mode `CHARGER_HIGHBEAMS_MODE`Confirmed

Request22 03 2D
Service 22DID 032D
Module763 → 4E3
Every250 ms
Testing for 2016 to 2017, 2020, 2022 to 2026

Example reply from a 2021 Dodge Charger.

Bits 4 to 7 of the reply, 4 bits.

0b0000 = 0 → OFF

Unit: Named states

States
Raw value	State	Meaning
`0`	`OFF`	Off
`1`	`ON`	On
`2`	`HELD`	Held

Confirmed for 2015, 2018 to 2019, 2021. In testing for 2016 to 2017, 2020, 2022 to 2023. Not supported for 2006, 2013, 2026.

High beams `CHARGER_HIGHBEAMS_ON`Confirmed

Request22 03 2D
Service 22DID 032D
Module763 → 4E3
Every250 ms
Testing for 2016 to 2017, 2020, 2022 to 2026

Example reply from a 2021 Dodge Charger.

Bit 3 of the reply.

0b0 = 0 → 0

Formula: val
Range: 0 to 1
Unit: Off or on

Confirmed for 2015, 2018 to 2019, 2021. In testing for 2016 to 2017, 2020, 2022 to 2023. Not supported for 2006, 2013, 2026.

Rear wiper `CHARGER_REAR_WIPER`Confirmed

Request22 03 2D
Service 22DID 032D
Module763 → 4E3
Every250 ms
Testing for 2016 to 2017, 2020, 2022 to 2026

Example reply from a 2021 Dodge Charger.

Bits 12 to 15 of the reply, 4 bits.

0b0000 = 0 → OFF

Unit: Named states

States
Raw value	State	Meaning
`0`	`OFF`	Off
`1`	`SPRAY`	Spray
`2`	`AUTO`	Auto
`4`	`ON`	On

Confirmed for 2015, 2018 to 2019, 2021. In testing for 2016 to 2017, 2020, 2022 to 2023. Not supported for 2006, 2013, 2026.

Relative throttle position `TP_R`SAE J1979Confirmed

Relative or 'learned' throttle position.

Request01 45
Service 01PID 45
Module7E0 → 7E8
Every250 ms

Bits 0 to 7 of the reply, 8 bits.

Formula: (val × 100 ÷ 255)
Range: 0 to 100 %
Unit: %

Confirmed for 2018 to 2019. Supported for 2026.

Control › Pedals

Accelerator pedal position D `APP_D`SAE J1979Confirmed

Request01 49
Service 01PID 49
Module7E0 → 7E8
Every250 ms

Bits 0 to 7 of the reply, 8 bits.

Formula: (val × 100 ÷ 255)
Range: 0 to 100 %
Unit: %

Confirmed for 2019. Supported for 2026.

Accelerator pedal position E `APP_E`SAE J1979Confirmed

Request01 4A
Service 01PID 4A
Module7E0 → 7E8
Every250 ms

Bits 0 to 7 of the reply, 8 bits.

Formula: (val × 100 ÷ 255)
Range: 0 to 100 %
Unit: %

Confirmed for 2019. Supported for 2026.

Control parameters

How to read a parameter card

High beam mode `CHARGER_HIGHBEAMS_MODE`Confirmed

Absolute throttle position `TP`SAE J1979Confirmed

Absolute throttle position B `TP_B`SAE J1979Confirmed

Brake booster pressure `CHARGER_BRAKE_BOOSTER_P`

High beam mode `CHARGER_HIGHBEAMS_MODE`Confirmed

High beams `CHARGER_HIGHBEAMS_ON`Confirmed

Rear wiper `CHARGER_REAR_WIPER`Confirmed

Relative throttle position `TP_R`SAE J1979Confirmed

Control › Pedals

Accelerator pedal position D `APP_D`SAE J1979Confirmed

Accelerator pedal position E `APP_E`SAE J1979Confirmed

Start your test drive today.

Keyboard shortcuts

Control parameters

Absolute throttle position TPSAE J1979Confirmed

Absolute throttle position B TP_BSAE J1979Confirmed

Brake booster pressure CHARGER_BRAKE_BOOSTER_P

High beam mode CHARGER_HIGHBEAMS_MODEConfirmed

High beams CHARGER_HIGHBEAMS_ONConfirmed

Rear wiper CHARGER_REAR_WIPERConfirmed

Relative throttle position TP_RSAE J1979Confirmed

Control › Pedals

Accelerator pedal position D APP_DSAE J1979Confirmed

Accelerator pedal position E APP_ESAE J1979Confirmed

Start your test drive today.

Absolute throttle position `TP`SAE J1979Confirmed

Absolute throttle position B `TP_B`SAE J1979Confirmed

Brake booster pressure `CHARGER_BRAKE_BOOSTER_P`

High beam mode `CHARGER_HIGHBEAMS_MODE`Confirmed

High beams `CHARGER_HIGHBEAMS_ON`Confirmed

Rear wiper `CHARGER_REAR_WIPER`Confirmed

Relative throttle position `TP_R`SAE J1979Confirmed

Accelerator pedal position D `APP_D`SAE J1979Confirmed

Accelerator pedal position E `APP_E`SAE J1979Confirmed