Pelican
Get the app

Ford EcoSport

FORD_MAP parameters

The Ford EcoSport has 1 FORD_MAP parameter.

● Confirmed◆ In testing○ Supported× Not supported

How to read a parameter card

Manifold absolute pressure sensor voltage FORD_MAP_VConfirmed

Typically varies from 1 volt at idle to 5 volts during wide open throttle.

  • Request22 03 01
  • Service 22DID 0301
  • Module7E0 → 7E8
  • Every250 ms
  • Testing

Example reply from a 2019 Ford EcoSport.

Bits 0 to 15 of the reply, 16 bits.

0x01E0 = 480 → (480 ÷ 1024) = 0.46875 V

Formula
(val ÷ 1024)
Range
0 to 5 V
Unit
V

Confirmed for 2018 to 2019. In testing for 2003 to 2017, 2020 to 2022.

  1. The parameter's name and its ID in the OBDb. Confirmed shows when a response from a real car confirms the parameter.
  2. The clutch mark shows a Connectable, a parameter that Pelican surfaces in its interface.
  3. The service and PID/DID asked for, the control module it's sent to, and how often Pelican asks.
  4. The reply's bytes. The parameter's bytes are blue. Bytes for other parameters in the same reply are grayed out. Hover over a byte to see the parameter it represents.
  5. Where the parameter is in the response, and how Pelican converts the raw value into a value.
  6. A real reply, decoded. The raw value comes first, then the reading.
  7. Which model years have tested this parameter.

Manifold absolute pressure sensor voltage FORD_MAP_VConfirmed

Typically varies from 1 volt at idle to 5 volts during wide open throttle.

  • Request22 03 01
  • Service 22DID 0301
  • Module7E0 → 7E8
  • Every250 ms
  • Testing

Example reply from a 2019 Ford EcoSport.

Bits 0 to 15 of the reply, 16 bits.

0x01E0 = 480 → (480 ÷ 1024) = 0.46875 V

Formula
(val ÷ 1024)
Range
0 to 5 V
Unit
V

Confirmed for 2018 to 2019. In testing for 2003 to 2017, 2020 to 2022.

Start your test drive today.

Download Pelican on the App Store

See all featuresCompare plansJoin the beta crew

Keyboard shortcuts

jk/↓↑
Move down or up through a list or a grid.
hl/←→
Move across a row or between cards.
Enter
Open the focused link.
f
Open the current focus area's filter.
↓
In a filter, move to the first result.
Esc
Close a filter or a dialog.
?
Show these shortcuts.