Fuel parameters
The Ford Fusion Hybrid has 12 fuel parameters.
● Confirmed◆ In testing○ Supported× Not supported
Air/fuel ratio FUSIONH_AIR_FUEL_RATConfirmed
- Request
22 F4 34 - Service 22
DID F434 - Module
7E0 → 7E8 - Every
1 s - Testing for 2010 to 2016, 2018
Example reply from a 2020 Ford Fusion Hybrid.
Bits 0 to 15 of the reply, 16 bits.
0x0000 = 0 → (0 × 0.000446787) = 0
- Formula
(val × 0.000446787)- Range
- 0 to 29.2801
- Unit
- Number
Confirmed for 2017, 2019 to 2020. In testing for 2010 to 2016, 2018.
Engine fuel rate FUSIONH_ENG_FUEL_RATE
Pelican can show this parameter as the fuel rate.
- Request
22 F4 5E - Service 22
DID F45E - Module
7E0 → 7E8 - Every
1 s - Testing
Bits 0 to 15 of the reply, 16 bits.
- Formula
(val ÷ 20)- Range
- 0 to 3276.75 L/h
- Unit
- L/h
In testing for 2010 to 2016, 2018. Not supported for 2017, 2019 to 2020.
Fuel injection impulse width FUSIONH_FUEL_INJ_IMPULSE
- Request
22 16 8B - Service 22
DID 168B - Module
7E0 → 7E8 - Every
1 s - Testing
Bits 0 to 15 of the reply, 16 bits.
- Formula
(val ÷ 125000)- Range
- 0 to 0.1 s
- Unit
- s
In testing for 2010 to 2016, 2018. Not supported for 2017, 2019 to 2020.
Fuel level FUSIONH_FLI_7E0
Pelican can show this parameter as the fuel tank level.
- Request
22 16 C1 - Service 22
DID 16C1 - Module
7E0 → 7E8 - Every
30 s - Testing
Bits 0 to 15 of the reply, 16 bits.
- Formula
(val × 0.0030518509)- Range
- 0 to 200 %
- Unit
- %
In testing for 2010 to 2016, 2018. Not supported for 2017, 2019 to 2020.
Fuel level FUSIONH_FLI_7E0_7E0Confirmed
Pelican can show this parameter as the fuel tank level.
- Request
22 F4 2F - Service 22
DID F42F - Module
7E0 → 7E8 - Every
30 s - Testing for 2010 to 2012, 2014 to 2016, 2018
Example reply from a 2020 Ford Fusion Hybrid.
Bits 0 to 7 of the reply, 8 bits.
0x00 = 0 → (0 × 100 ÷ 255) = 0 %
- Formula
(val × 100 ÷ 255)- Range
- 0 to 100 %
- Unit
- %
Confirmed for 2013, 2017, 2019 to 2020. In testing for 2010 to 2012, 2014 to 2016, 2018.
Fuel pump duty cycle FUSIONH_FUEL_PMP_DUTY
- Request
22 16 72 - Service 22
DID 1672 - Module
7E0 → 7E8 - Every
1 s - Testing
Bits 0 to 7 of the reply, 8 bits.
- Formula
(val × 25 ÷ 32)- Range
- 0 to 199.2187 %
- Unit
- %
In testing for 2010 to 2016, 2018. Not supported for 2017, 2019 to 2020.
Fuel system 1 status FUELSYS1SAE J1979Confirmed
- Request
01 03 - Service 01
PID 03 - Module
7E0 → 7E8 - Every
250 ms
Bits 0 to 7 of the reply, 8 bits.
- Unit
- Named states
| Raw value | State | Meaning |
|---|---|---|
0 | OFF | Engine is off |
1 | OL | Open loop - has not yet satisfied conditions to go closed loop |
2 | CL | Closed loop - using oxygen sensor(s) as feedback for fuel control |
4 | OL-Drive | Open loop due to driving conditions (e.g. power enrichment, deceleration enleanment) |
8 | OL-Fault | Open loop - due to detected system fault |
16 | CL-Fault | Closed loop, but fault with at least one oxygen sensor - may be using single oxygen sensor for fuel control |
32 | OL B2 | Open loop - has not yet satisfied conditions to go closed loop (Bank 2) |
64 | OL-Drive B2 | Open loop due to driving conditions (Bank 2) (e.g. power enrichment, deceleration enleanment, cylinder deactivation) |
128 | OL-Fault B2 | Open loop - due to detected system fault (Bank 2) |
Confirmed for 2013, 2020. Supported for 2017, 2019.
Fuel system 2 status FUELSYS2SAE J1979Confirmed
- Request
01 03 - Service 01
PID 03 - Module
7E0 → 7E8 - Every
250 ms
Bits 8 to 15 of the reply, 8 bits.
- Unit
- Named states
| Raw value | State | Meaning |
|---|---|---|
0 | OFF | Engine is off |
1 | OL | Open loop - has not yet satisfied conditions to go closed loop |
2 | CL | Closed loop - using oxygen sensor(s) as feedback for fuel control |
4 | OL-Drive | Open loop due to driving conditions (e.g. power enrichment, deceleration enleanment) |
8 | OL-Fault | Open loop - due to detected system fault |
16 | CL-Fault | Closed loop, but fault with at least one oxygen sensor - may be using single oxygen sensor for fuel control |
32 | OL B2 | Open loop - has not yet satisfied conditions to go closed loop (Bank 2) |
64 | OL-Drive B2 | Open loop due to driving conditions (Bank 2) (e.g. power enrichment, deceleration enleanment, cylinder deactivation) |
128 | OL-Fault B2 | Open loop - due to detected system fault (Bank 2) |
Confirmed for 2013, 2020. Supported for 2017, 2019.
Fuel tank level FLISAE J1979Confirmed
Pelican can show this parameter as the fuel tank level.
- Request
01 2F - Service 01
PID 2F - Module
7E0 → 7E8 - Every
1 s
Bits 0 to 7 of the reply, 8 bits.
- Formula
(val × 100 ÷ 255)- Range
- 0 to 100 %
- Unit
- %
Confirmed for 2013, 2017, 2019 to 2020.
Fuel tank level FUSIONH_FLI
Pelican can show this parameter as the fuel tank level.
- Request
22 61 85 - Service 22
DID 6185 - Module
720 → 728 - Every
30 s - Testing
Bits 0 to 7 of the reply, 8 bits.
- Formula
(val × 100 ÷ 255)- Range
- 0 to 100 %
- Unit
- %
In testing for 2010 to 2012, 2014 to 2016, 2018. Not supported for 2013, 2017, 2019 to 2020.
Fuel tank pressure FUSIONH_FUEL_TANK_P
- Request
22 16 39 - Service 22
DID 1639 - Module
7E0 → 7E8 - Every
1 s - Testing
Bits 0 to 15 of the reply, 16 bits.
- Formula
(val ÷ 6.901311249)- Range
- 0 to 9496.0214 psi
- Unit
- psi
In testing for 2010 to 2016, 2018. Not supported for 2017, 2019 to 2020.
Fuel temperature FUSIONH_FUEL_T
- Request
22 05 22 - Service 22
DID 0522 - Module
7E0 → 7E8 - Every
5 s - Testing
Bits 0 to 7 of the reply, 8 bits.
- Formula
(val − 40)- Range
- -40 to 215 °C
- Unit
- °C
In testing for 2010 to 2016, 2018. Not supported for 2017, 2019 to 2020.
