Transmission parameters

The Ford Transit Connect has 1 transmission parameter.

● Confirmed◆ In testing○ Supported× Not supported

How to read a parameter card

The automatic transmission gear.

Example reply from a 2020 Ford Transit Connect.

Bits 0 to 7 of the reply, 8 bits.

0x01 = 1 → 1

Confirmed for 2012 to 2013, 2020. In testing for 2002 to 2011, 2014 to 2019, 2021 to 2025. Not supported for 2026.

The parameter's name and its ID in the OBDb. Confirmed shows when a response from a real car confirms the parameter.
The clutch mark shows a Connectable, a parameter that Pelican surfaces in its interface.
The service and PID/DID asked for, the control module it's sent to, and how often Pelican asks.
The reply's bytes. The parameter's bytes are blue. Bytes for other parameters in the same reply are grayed out. Hover over a byte to see the parameter it represents.
Where the parameter is in the response, and how Pelican converts the raw value into a value.
A real reply, decoded. The raw value comes first, then the reading.
Which model years have tested this parameter.

The automatic transmission gear.

Example reply from a 2020 Ford Transit Connect.

Bits 0 to 7 of the reply, 8 bits.

0x01 = 1 → 1

Confirmed for 2012 to 2013, 2020. In testing for 2002 to 2011, 2014 to 2019, 2021 to 2025. Not supported for 2026.