Honda Accord Hybrid

Movement parameters

The Honda Accord Hybrid has 2 movement parameters.

● Confirmed◆ In testing○ Supported× Not supported

How to read a parameter card

Generator motor speed HONDA_GENERATOR_MOTOR_SPEEDConfirmed

  • Request22 20 01
  • Service 22DID 2001
  • ModuleDBEF
  • Every5 s
  • Testing

Example reply from a 2021 Honda Accord Hybrid.

Bits 184 to 191 of the reply, 8 bits.

0x00 = 0 → (0 × 64) = 0 rpm

Formula
(val × 64)
Range
0 to 16320 rpm
Unit
rpm

Confirmed for 2021. In testing for 2005 to 2007, 2014 to 2015, 2017 to 2020, 2022 to 2026.

  1. The parameter's name and its ID in the OBDb. Confirmed shows when a response from a real car confirms the parameter.
  2. The clutch mark shows a Connectable, a parameter that Pelican surfaces in its interface.
  3. The service and PID/DID asked for, the control module it's sent to, and how often Pelican asks.
  4. The reply's bytes. The parameter's bytes are blue. Bytes for other parameters in the same reply are grayed out. Hover over a byte to see the parameter it represents.
  5. Where the parameter is in the response, and how Pelican converts the raw value into a value.
  6. A real reply, decoded. The raw value comes first, then the reading.
  7. Which model years have tested this parameter.

Generator motor speed HONDA_GENERATOR_MOTOR_SPEEDConfirmed

  • Request22 20 01
  • Service 22DID 2001
  • ModuleDBEF
  • Every5 s
  • Testing

Example reply from a 2021 Honda Accord Hybrid.

Bits 184 to 191 of the reply, 8 bits.

0x00 = 0 → (0 × 64) = 0 rpm

Formula
(val × 64)
Range
0 to 16320 rpm
Unit
rpm

Confirmed for 2021. In testing for 2005 to 2007, 2014 to 2015, 2017 to 2020, 2022 to 2026.

Vehicle speed VSSSAE J1979Confirmed

Pelican can show this parameter as the speed.

  • Request01 0D
  • Service 01PID 0D
  • Module7E0 → 7E8
  • Every250 ms

Bits 0 to 7 of the reply, 8 bits.

Formula
val
Range
0 to 255 km/h
Unit
km/h

Confirmed for 2015, 2018 to 2022, 2024 to 2025.

Keyboard shortcuts

jk/↓↑
Move down or up through a list or a grid.
hl/←→
Move across a row or between cards.
Enter
Open the focused link.
f
Open the current focus area's filter.
↓
In a filter, move to the first result.
Esc
Close a filter or a dialog.
?
Show these shortcuts.