Pelican
Get the app

Honda CR-V

Climate parameters

The Honda CR-V has 2 climate parameters.

● Confirmed◆ In testing○ Supported× Not supported

How to read a parameter card

A/C pressure CRV_AC_P

  • Request22 26 13
  • Service 22DID 2613
  • ModuleDA0E → 0E
  • Every1 s
  • Testing

Bits 120 to 135 of the reply, 16 bits.

Formula
val
Range
0 to 4000 kPa
Unit
kPa

In testing for 1995 to 2009, 2011 to 2022, 2025 to 2026. Not supported for 2010, 2023 to 2024, 2027.

  1. The parameter's name and its ID in the OBDb. Confirmed shows when a response from a real car confirms the parameter.
  2. The clutch mark shows a Connectable, a parameter that Pelican surfaces in its interface.
  3. The service and PID/DID asked for, the control module it's sent to, and how often Pelican asks.
  4. The reply's bytes. The parameter's bytes are blue. Bytes for other parameters in the same reply are grayed out. Hover over a byte to see the parameter it represents.
  5. Where the parameter is in the response, and how Pelican converts the raw value into a value.
  6. A real reply, decoded. The raw value comes first, then the reading.
  7. Which model years have tested this parameter.

A/C pressure CRV_AC_P

  • Request22 26 13
  • Service 22DID 2613
  • ModuleDA0E → 0E
  • Every1 s
  • Testing

Bits 120 to 135 of the reply, 16 bits.

Formula
val
Range
0 to 4000 kPa
Unit
kPa

In testing for 1995 to 2009, 2011 to 2022, 2025 to 2026. Not supported for 2010, 2023 to 2024, 2027.

Outside air temperature CRV_AATConfirmed

  • Request22 70 28
  • Service 22DID 7028
  • ModuleDA60 → 60
  • Every5 s
  • Testing for 1995 to 2022, 2025 to 2026

Bits 132 to 143 of the reply, 12 bits. The value is signed.

Formula
val
Range
-40 to 2047 °F
Unit
°F

Confirmed for 2023 to 2024, 2027. In testing for 1995 to 2009, 2011 to 2022, 2025 to 2026. Not supported for 2010.

Start your test drive today.

Download Pelican on the App Store

See all featuresCompare plansJoin the beta crew

Keyboard shortcuts

jk/↓↑
Move down or up through a list or a grid.
hl/←→
Move across a row or between cards.
Enter
Open the focused link.
f
Open the current focus area's filter.
↓
In a filter, move to the first result.
Esc
Close a filter or a dialog.
?
Show these shortcuts.