Pelican
Get the app

Jeep Renegade

Battery parameters

The Jeep Renegade has 3 battery parameters.

● Confirmed◆ In testing○ Supported× Not supported

How to read a parameter card

Battery voltage RENEGADE_BATT_V_ECUConfirmed

  • Request22 19 55
  • Service 22DID 1955
  • ModuleDA10 → 10
  • Every30 s
  • Testing for 2014 to 2017, 2022 to 2026

Bits 0 to 15 of the reply, 16 bits.

Formula
(val ÷ 2000)
Range
0 to 20 V
Unit
V

Confirmed for 2018 to 2021. In testing for 2014, 2016 to 2017, 2022 to 2026. Not supported for 2015.

  1. The parameter's name and its ID in the OBDb. Confirmed shows when a response from a real car confirms the parameter.
  2. The clutch mark shows a Connectable, a parameter that Pelican surfaces in its interface.
  3. The service and PID/DID asked for, the control module it's sent to, and how often Pelican asks.
  4. The reply's bytes. The parameter's bytes are blue. Bytes for other parameters in the same reply are grayed out. Hover over a byte to see the parameter it represents.
  5. Where the parameter is in the response, and how Pelican converts the raw value into a value.
  6. A real reply, decoded. The raw value comes first, then the reading.
  7. Which model years have tested this parameter.

Battery voltage RENEGADE_BATT_V_ECUConfirmed

  • Request22 19 55
  • Service 22DID 1955
  • ModuleDA10 → 10
  • Every30 s
  • Testing for 2014 to 2017, 2022 to 2026

Bits 0 to 15 of the reply, 16 bits.

Formula
(val ÷ 2000)
Range
0 to 20 V
Unit
V

Confirmed for 2018 to 2021. In testing for 2014, 2016 to 2017, 2022 to 2026. Not supported for 2015.

Battery voltage, BCM RENEGADE_BATT_V_BCMConfirmed

  • Request22 10 04
  • Service 22DID 1004
  • ModuleDA40 → 40
  • Every30 s
  • Testing for 2014, 2016 to 2017, 2022 to 2026

Bits 0 to 7 of the reply, 8 bits.

Formula
(val ÷ 10)
Range
0 to 25 V
Unit
V

Confirmed for 2015, 2018 to 2021. In testing for 2014, 2016 to 2017, 2022 to 2026.

Control module voltage VPWRSAE J1979Confirmed

Power input to the OBD control module. VPWR is normally battery voltage, less any voltage drop in the circuit between the battery and the control module.

Pelican can show this parameter as the starter battery voltage.

  • Request01 42
  • Service 01PID 42
  • Module7E0 → 7E8
  • Every10 s

Bits 0 to 15 of the reply, 16 bits.

Formula
(val ÷ 1000)
Range
0 to 65535 V
Unit
V

Confirmed for 2015, 2018 to 2019, 2021. Supported for 2016 to 2017, 2020, 2024.

Start your test drive today.

Download Pelican on the App Store

See all featuresCompare plansJoin the beta crew

Keyboard shortcuts

jk/↓↑
Move down or up through a list or a grid.
hl/←→
Move across a row or between cards.
Enter
Open the focused link.
f
Open the current focus area's filter.
↓
In a filter, move to the first result.
Esc
Close a filter or a dialog.
?
Show these shortcuts.