Pelican
Get the app

Mazda 6

MAZDA6_EVAP parameters

The Mazda 6 has 1 MAZDA6_EVAP parameter.

● Confirmed◆ In testing○ Supported× Not supported

How to read a parameter card

Evaporative pressure sensor, raw count MAZDA6_EVAP_RAWConfirmed

  • Request22 03 8E
  • Service 22DID 038E
  • Module7E0 → 7E8
  • Every1 s
  • Testing for 2003 to 2012, 2015 to 2016, 2018, 2021 to 2025

Example reply from a 2020 Mazda 6.

Bits 0 to 15 of the reply, 16 bits.

0x05E1 = 1505 → 1,505

Formula
val
Range
0 to 65535
Unit
Number

Confirmed for 2013 to 2014, 2017, 2019 to 2020. In testing for 2003 to 2006, 2008 to 2012, 2015 to 2016, 2018, 2021 to 2025. Not supported for 2007.

  1. The parameter's name and its ID in the OBDb. Confirmed shows when a response from a real car confirms the parameter.
  2. The clutch mark shows a Connectable, a parameter that Pelican surfaces in its interface.
  3. The service and PID/DID asked for, the control module it's sent to, and how often Pelican asks.
  4. The reply's bytes. The parameter's bytes are blue. Bytes for other parameters in the same reply are grayed out. Hover over a byte to see the parameter it represents.
  5. Where the parameter is in the response, and how Pelican converts the raw value into a value.
  6. A real reply, decoded. The raw value comes first, then the reading.
  7. Which model years have tested this parameter.

Evaporative pressure sensor, raw count MAZDA6_EVAP_RAWConfirmed

  • Request22 03 8E
  • Service 22DID 038E
  • Module7E0 → 7E8
  • Every1 s
  • Testing for 2003 to 2012, 2015 to 2016, 2018, 2021 to 2025

Example reply from a 2020 Mazda 6.

Bits 0 to 15 of the reply, 16 bits.

0x05E1 = 1505 → 1,505

Formula
val
Range
0 to 65535
Unit
Number

Confirmed for 2013 to 2014, 2017, 2019 to 2020. In testing for 2003 to 2006, 2008 to 2012, 2015 to 2016, 2018, 2021 to 2025. Not supported for 2007.

Start your test drive today.

Download Pelican on the App Store

See all featuresCompare plansJoin the beta crew

Keyboard shortcuts

jk/↓↑
Move down or up through a list or a grid.
hl/←→
Move across a row or between cards.
Enter
Open the focused link.
f
Open the current focus area's filter.
↓
In a filter, move to the first result.
Esc
Close a filter or a dialog.
?
Show these shortcuts.