Pelican
Get the app

Mazda CX-7

MAZDA_LPFP parameters

The Mazda CX-7 has 1 MAZDA_LPFP parameter.

● Confirmed◆ In testing○ Supported× Not supported

How to read a parameter card

Low pressure fuel pump commanded duty cycle MAZDA_LPFP_DUTY

  • Request22 03 07
  • Service 22DID 0307
  • Module7E0 → 7E8
  • Every250 ms
  • Testing

Bits 0 to 15 of the reply, 16 bits.

Formula
(val × 0.0030517578)
Range
0 to 100 %
Unit
%

In testing for 2007 to 2012.

  1. The parameter's name and its ID in the OBDb. Confirmed shows when a response from a real car confirms the parameter.
  2. The clutch mark shows a Connectable, a parameter that Pelican surfaces in its interface.
  3. The service and PID/DID asked for, the control module it's sent to, and how often Pelican asks.
  4. The reply's bytes. The parameter's bytes are blue. Bytes for other parameters in the same reply are grayed out. Hover over a byte to see the parameter it represents.
  5. Where the parameter is in the response, and how Pelican converts the raw value into a value.
  6. A real reply, decoded. The raw value comes first, then the reading.
  7. Which model years have tested this parameter.

Low pressure fuel pump commanded duty cycle MAZDA_LPFP_DUTY

  • Request22 03 07
  • Service 22DID 0307
  • Module7E0 → 7E8
  • Every250 ms
  • Testing

Bits 0 to 15 of the reply, 16 bits.

Formula
(val × 0.0030517578)
Range
0 to 100 %
Unit
%

In testing for 2007 to 2012.

Start your test drive today.

Download Pelican on the App Store

See all featuresCompare plansJoin the beta crew

Keyboard shortcuts

jk/↓↑
Move down or up through a list or a grid.
hl/←→
Move across a row or between cards.
Enter
Open the focused link.
f
Open the current focus area's filter.
↓
In a filter, move to the first result.
Esc
Close a filter or a dialog.
?
Show these shortcuts.