Toyota Prius v

Door parameters

The Toyota Prius v has 2 door parameters.

● Confirmed◆ In testing○ Supported× Not supported

How to read a parameter card

Charging lid open TOYOTA_CHG_LID

  • Request22 16 25
  • Service 22DID 1625
  • Module745 → 74D
  • Every10 s
  • Testing

Bit 14 of the reply.

Formula
val
Range
0 to 1
Unit
No or yes

In testing for 2011 to 2017.

  1. The parameter's name and its ID in the OBDb. Confirmed shows when a response from a real car confirms the parameter.
  2. The clutch mark shows a Connectable, a parameter that Pelican surfaces in its interface.
  3. The service and PID/DID asked for, the control module it's sent to, and how often Pelican asks.
  4. The reply's bytes. The parameter's bytes are blue. Bytes for other parameters in the same reply are grayed out. Hover over a byte to see the parameter it represents.
  5. Where the parameter is in the response, and how Pelican converts the raw value into a value.
  6. A real reply, decoded. The raw value comes first, then the reading.
  7. Which model years have tested this parameter.

Charging lid open TOYOTA_CHG_LID

  • Request22 16 25
  • Service 22DID 1625
  • Module745 → 74D
  • Every10 s
  • Testing

Bit 14 of the reply.

Formula
val
Range
0 to 1
Unit
No or yes

In testing for 2011 to 2017.

Smart key TOYOTA_SMART_KEY

  • Request21 C4
  • Service 21PID C4
  • Module7E2 → 7EA
  • Every250 ms
  • Testing

Bit 69 of the reply.

Formula
val
Range
0 to 1
Unit
Off or on

In testing for 2011 to 2017.

Keyboard shortcuts

jk/↓↑
Move down or up through a list or a grid.
hl/←→
Move across a row or between cards.
Enter
Open the focused link.
f
Open the current focus area's filter.
↓
In a filter, move to the first result.
Esc
Close a filter or a dialog.
?
Show these shortcuts.