Brake parameters

The Toyota Sienna Hybrid has 1 brake parameter.

● Confirmed◆ In testing○ Supported× Not supported

How to read a parameter card

Example reply from a 2023 Toyota Sienna Hybrid.

Bits 0 to 7 of the reply, 8 bits.

0x00 = 0 → APPLIED

States
Raw value	State	Meaning
`0`	`APPLIED`	Applied

Confirmed for 2021, 2023. In testing for 2022, 2024 to 2026.

The parameter's name and its ID in the OBDb. Confirmed shows when a response from a real car confirms the parameter.
The clutch mark shows a Connectable, a parameter that Pelican surfaces in its interface.
The service and PID/DID asked for, the control module it's sent to, and how often Pelican asks.
The reply's bytes. The parameter's bytes are blue. Bytes for other parameters in the same reply are grayed out. Hover over a byte to see the parameter it represents.
Where the parameter is in the response, and how Pelican converts the raw value into a value.
A real reply, decoded. The raw value comes first, then the reading.
Which model years have tested this parameter.

Example reply from a 2023 Toyota Sienna Hybrid.

Bits 0 to 7 of the reply, 8 bits.

0x00 = 0 → APPLIED

States
Raw value	State	Meaning
`0`	`APPLIED`	Applied

Confirmed for 2021, 2023. In testing for 2022, 2024 to 2026.