Pelican
Get the app

Toyota Yaris

Detail parameters

The Toyota Yaris has 1 detail parameter.

● Confirmed◆ In testing○ Supported× Not supported

How to read a parameter card

Inspection mode YARIS_INSPECTION_MODEConfirmed

  • Request21 A6
  • Service 21PID A6
  • Module7B0 → 7B8
  • Every60 s
  • Testing for 1998 to 2014, 2016, 2018 to 2021, 2023 to 2026

Example reply from a 2022 Toyota Yaris.

Bit 0 of the reply.

0b0 = 0 → 0

Formula
val
Range
0 to 1
Unit
Off or on

Confirmed for 2015, 2017, 2022. In testing for 1998 to 2006, 2008 to 2009, 2011 to 2014, 2016, 2018 to 2021, 2023, 2026. Not supported for 2007, 2010, 2024 to 2025.

  1. The parameter's name and its ID in the OBDb. Confirmed shows when a response from a real car confirms the parameter.
  2. The clutch mark shows a Connectable, a parameter that Pelican surfaces in its interface.
  3. The service and PID/DID asked for, the control module it's sent to, and how often Pelican asks.
  4. The reply's bytes. The parameter's bytes are blue. Bytes for other parameters in the same reply are grayed out. Hover over a byte to see the parameter it represents.
  5. Where the parameter is in the response, and how Pelican converts the raw value into a value.
  6. A real reply, decoded. The raw value comes first, then the reading.
  7. Which model years have tested this parameter.

Inspection mode YARIS_INSPECTION_MODEConfirmed

  • Request21 A6
  • Service 21PID A6
  • Module7B0 → 7B8
  • Every60 s
  • Testing for 1998 to 2014, 2016, 2018 to 2021, 2023 to 2026

Example reply from a 2022 Toyota Yaris.

Bit 0 of the reply.

0b0 = 0 → 0

Formula
val
Range
0 to 1
Unit
Off or on

Confirmed for 2015, 2017, 2022. In testing for 1998 to 2006, 2008 to 2009, 2011 to 2014, 2016, 2018 to 2021, 2023, 2026. Not supported for 2007, 2010, 2024 to 2025.

Start your test drive today.

Download Pelican on the App Store

See all featuresCompare plansJoin the beta crew

Keyboard shortcuts

jk/↓↑
Move down or up through a list or a grid.
hl/←→
Move across a row or between cards.
Enter
Open the focused link.
f
Open the current focus area's filter.
↓
In a filter, move to the first result.
Esc
Close a filter or a dialog.
?
Show these shortcuts.