BMW X1

Control parameters

The BMW X1 has 8 control parameters.

● Confirmed◆ In testing○ Supported× Not supported

How to read a parameter card

Brake switch X1_BRAKE_SWITCHConfirmed

  • Request22 DA 28
  • Service 22DID DA28
  • Module6F1 → 618
  • Every1 s
  • Testing for 2009 to 2011, 2013 to 2026

Example reply from a 2012 BMW X1.

Bits 8 to 15 of the reply, 8 bits.

0x00 = 0 → 0

Formula
val
Range
0 to 1
Unit
Number

Confirmed for 2012. In testing for 2009 to 2010, 2013 to 2014, 2016, 2019 to 2020, 2026. Not supported for 2011, 2015, 2017 to 2018, 2021 to 2025.

  1. The parameter's name and its ID in the OBDb. Confirmed shows when a response from a real car confirms the parameter.
  2. The clutch mark shows a Connectable, a parameter that Pelican surfaces in its interface.
  3. The service and PID/DID asked for, the control module it's sent to, and how often Pelican asks.
  4. The reply's bytes. The parameter's bytes are blue. Bytes for other parameters in the same reply are grayed out. Hover over a byte to see the parameter it represents.
  5. Where the parameter is in the response, and how Pelican converts the raw value into a value.
  6. A real reply, decoded. The raw value comes first, then the reading.
  7. Which model years have tested this parameter.

Absolute throttle position TPSAE J1979Confirmed

Throttle position at idle will usually be more than 0%, and throttle position at wide open throttle will usually be less than 100%.

Pelican can show this parameter as the throttle position.

  • Request01 11
  • Service 01PID 11
  • Module7E0 → 7E8
  • Every250 ms

Bits 0 to 7 of the reply, 8 bits.

Formula
(val × 100 ÷ 255)
Range
0 to 100 %
Unit
%

Confirmed for 2011 to 2012, 2023. Supported for 2013 to 2018, 2021 to 2022, 2024 to 2025.

Absolute throttle position B TP_BSAE J1979Confirmed

Pelican can show this parameter as the throttle position.

  • Request01 47
  • Service 01PID 47
  • Module7E0 → 7E8
  • Every250 ms

Bits 0 to 7 of the reply, 8 bits.

Formula
(val × 100 ÷ 255)
Range
0 to 100 %
Unit
%

Confirmed for 2023. Supported for 2013, 2015, 2021.

Brake pressure X1_BRAKE_P

  • Request22 DB E5
  • Service 22DID DBE5
  • Module6F1 → 629
  • Every250 ms
  • Testing

Bits 0 to 15 of the reply, 16 bits. The value is signed.

Formula
(val ÷ 10)
Range
-3276 to 3276 bar
Unit
bar

In testing for 2009 to 2026.

Brake switch X1_BRAKE_SWITCHConfirmed

  • Request22 DA 28
  • Service 22DID DA28
  • Module6F1 → 618
  • Every1 s
  • Testing for 2009 to 2011, 2013 to 2026

Example reply from a 2012 BMW X1.

Bits 8 to 15 of the reply, 8 bits.

0x00 = 0 → 0

Formula
val
Range
0 to 1
Unit
Number

Confirmed for 2012. In testing for 2009 to 2010, 2013 to 2014, 2016, 2019 to 2020, 2026. Not supported for 2011, 2015, 2017 to 2018, 2021 to 2025.

Parking brake applied X1_PARK_BRAKE

  • Request22 D1 30
  • Service 22DID D130
  • Module6F1 → 640
  • Every5 s
  • Testing

Bits 0 to 7 of the reply, 8 bits.

Formula
val
Range
0 to 1
Unit
Off or on

In testing for 2009 to 2026.

Relative throttle position TP_RSAE J1979Confirmed

Relative or 'learned' throttle position.

  • Request01 45
  • Service 01PID 45
  • Module7E0 → 7E8
  • Every250 ms

Bits 0 to 7 of the reply, 8 bits.

Formula
(val × 100 ÷ 255)
Range
0 to 100 %
Unit
%

Confirmed for 2011, 2023. Supported for 2012 to 2018, 2021 to 2022.

Control › Pedals

Accelerator pedal position D APP_DSAE J1979Confirmed

  • Request01 49
  • Service 01PID 49
  • Module7E0 → 7E8
  • Every250 ms

Bits 0 to 7 of the reply, 8 bits.

Formula
(val × 100 ÷ 255)
Range
0 to 100 %
Unit
%

Confirmed for 2011, 2023. Supported for 2012 to 2013, 2015 to 2017, 2022.

Accelerator pedal position E APP_ESAE J1979Confirmed

  • Request01 4A
  • Service 01PID 4A
  • Module7E0 → 7E8
  • Every250 ms

Bits 0 to 7 of the reply, 8 bits.

Formula
(val × 100 ÷ 255)
Range
0 to 100 %
Unit
%

Confirmed for 2011, 2023. Supported for 2012 to 2013, 2015 to 2017, 2022.

Keyboard shortcuts

jk/↓↑
Move down or up through a list or a grid.
hl/←→
Move across a row or between cards.
Enter
Open the focused link.
f
Open the current focus area's filter.
↓
In a filter, move to the first result.
Esc
Close a filter or a dialog.
?
Show these shortcuts.