Connectable parameters
The Chrysler 200 has 105 Connectables, parameters that Pelican can monitor automatically.
● Confirmed◆ In testing○ Supported× Not supported
State of charge
High voltage battery charge CHRYSLER_HVBAT_SOC_RAW
Pelican can show this parameter as the state of charge.
- Request
22 D8 10 - Service 22
DID D810 - Module
6B4 → 694 - Every
1 s - Testing
Bits 0 to 15 of the reply, 16 bits.
- Formula
(val ÷ 512)- Range
- 0 to 100 %
- Unit
- %
In testing for 2012 to 2017. Not supported for 2011.
High voltage battery charge (calibrated) CHRYSLER_HVBAT_SOC
Pelican can show this parameter as the state of charge.
- Request
22 D4 10 - Service 22
DID D410 - Module
6B4 → 694 - Every
1 s - Testing
Bits 0 to 15 of the reply, 16 bits.
- Formula
(val ÷ 512)- Range
- 0 to 100 %
- Unit
- %
In testing for 2012, 2014, 2016 to 2017. Not supported for 2011, 2013, 2015.
HV battery state of charge CHRYSLER_HVBAT_ST_CHG
Pelican can show this parameter as the state of charge.
- Request
22 A0 10 - Service 22
DID A010 - Module
DA44 → 44 - Every
1 s - Testing
Bits 24 to 31 of the reply, 8 bits.
- Formula
(val × 20 ÷ 51)- Range
- 0 to 100 %
- Unit
- %
In testing for 2012 to 2017. Not supported for 2011.
State of health
High voltage battery health CHRYSLER_HVBAT_SOH
Pelican can show this parameter as the state of health.
- Request
22 D8 60 - Service 22
DID D860 - Module
6B4 → 694 - Every
3600 s - Testing
Bits 8 to 23 of the reply, 16 bits.
- Formula
(val ÷ 16)- Range
- 0 to 100 %
- Unit
- %
In testing for 2012 to 2017. Not supported for 2011.
HV battery state of health CHRYSLER_HVBAT_SOH_V2
Pelican can show this parameter as the state of health.
- Request
22 A0 29 - Service 22
DID A029 - Module
DA44 → 44 - Every
1 s - Testing
Bits 0 to 15 of the reply, 16 bits.
- Formula
(val ÷ 655.35)- Range
- 0 to 100 %
- Unit
- %
In testing for 2012 to 2017. Not supported for 2011.
Fuel tank level
Fuel level CHRYSLER_FLI
Pelican can show this parameter as the fuel tank level.
- Request
21 A8 - Service 21
PID A8 - Module
7E0 → 7E8 - Every
30 s - Testing
Bits 96 to 111 of the reply, 16 bits.
- Formula
(val ÷ 256)- Range
- 0 to 255 %
- Unit
- %
In testing for 2012 to 2017. Not supported for 2011.
Fuel level input CHRYSLER_FLI_INPUTConfirmed
Pelican can show this parameter as the fuel tank level.
- Request
22 02 27 - Service 22
DID 0227 - Module
7E0 → 7E8 - Every
30 s - Testing
Example reply from a 2013 Chrysler 200.
Bits 0 to 7 of the reply, 8 bits.
0x71 = 113 → (113 × 100 ÷ 255) = 44.313725 %
- Formula
(val × 100 ÷ 255)- Range
- 0 to 100 %
- Unit
- %
Confirmed for 2011, 2013. In testing for 2012, 2014 to 2017.
Fuel tank level FLISAE J1979Confirmed
Pelican can show this parameter as the fuel tank level.
- Request
01 2F - Service 01
PID 2F - Module
7E0 → 7E8 - Every
1 s
Bits 0 to 7 of the reply, 8 bits.
- Formula
(val × 100 ÷ 255)- Range
- 0 to 100 %
- Unit
- %
Confirmed for 2011, 2013. Supported for 2015.
Speed
Vehicle speed CHRYSLER_VSS
Pelican can show this parameter as the speed.
- Request
22 D4 02 - Service 22
DID D402 - Module
6A2 → 682 - Every
1 s - Testing
Bits 0 to 15 of the reply, 16 bits.
- Formula
(val ÷ 10)- Range
- 0 to 1000 km/h
- Unit
- km/h
In testing for 2012 to 2017. Not supported for 2011.
Vehicle speed CHRYSLER_VSS_6A8
Pelican can show this parameter as the speed.
- Request
22 D4 02 - Service 22
DID D402 - Module
6A8 → 688 - Every
250 ms - Testing
Bits 0 to 15 of the reply, 16 bits.
- Formula
(val ÷ 128)- Range
- 0 to 511 km/h
- Unit
- km/h
In testing for 2012 to 2017. Not supported for 2011.
Vehicle speed CHRYSLER_VSS_V2
Pelican can show this parameter as the speed.
- Request
21 C8 - Service 21
PID C8 - Module
6A9 → 689 - Every
250 ms - Testing
Bits 96 to 111 of the reply, 16 bits.
- Formula
(val ÷ 100)- Range
- 0 to 655 km/h
- Unit
- km/h
In testing for 2012 to 2017. Not supported for 2011.
Vehicle speed CHRYSLER_VSS_6A9
Pelican can show this parameter as the speed.
- Request
22 D7 11 - Service 22
DID D711 - Module
6A9 → 689 - Every
250 ms - Testing
Bits 0 to 7 of the reply, 8 bits.
- Formula
val- Range
- 0 to 255 km/h
- Unit
- km/h
In testing for 2012 to 2017. Not supported for 2011.
Vehicle speed CHRYSLER_VSS_6B4
Pelican can show this parameter as the speed.
- Request
22 D8 02 - Service 22
DID D802 - Module
6B4 → 694 - Every
250 ms - Testing
Bits 0 to 31 of the reply, 32 bits.
- Formula
(val × 64 ÷ 65535)- Range
- 0 to 4194368 km/h
- Unit
- km/h
In testing for 2012 to 2017. Not supported for 2011.
Vehicle speed VSSSAE J1979Confirmed
Pelican can show this parameter as the speed.
- Request
01 0D - Service 01
PID 0D - Module
7E0 → 7E8 - Every
250 ms
Bits 0 to 7 of the reply, 8 bits.
- Formula
val- Range
- 0 to 255 km/h
- Unit
- km/h
Confirmed for 2011, 2013. Supported for 2015.
Vehicle speed, engine computer CHRYSLER_VSS_ECU
Pelican can show this parameter as the speed.
- Request
22 19 0B - Service 22
DID 190B - Module
DA10 → 10 - Every
250 ms - Testing
Bits 0 to 15 of the reply, 16 bits.
- Formula
val- Range
- 0 to 300 km/h
- Unit
- km/h
In testing for 2012, 2014 to 2017. Not supported for 2011, 2013.
Vehicle speed, ESP CHRYSLER_VSS_ESP
Pelican can show this parameter as the speed.
- Request
22 D8 02 - Service 22
DID D802 - Module
6A2 → 682 - Every
250 ms - Testing
Bits 0 to 15 of the reply, 16 bits.
- Formula
(val × 1953 ÷ 250000)- Range
- 0 to 511 km/h
- Unit
- km/h
In testing for 2012 to 2017. Not supported for 2011.
Odometer
Odometer CHRYSLER_ODO_6A2
Pelican can show this parameter as the odometer.
- Request
22 D4 9C - Service 22
DID D49C - Module
6A2 → 682 - Every
30 s - Testing
Bits 0 to 31 of the reply, 32 bits.
- Formula
val- Range
- 0 to 4294967295 km
- Unit
- km
In testing for 2012 to 2017. Not supported for 2011.
Odometer CHRYSLER_ODO_6A6
Pelican can show this parameter as the odometer.
- Request
22 D4 9C - Service 22
DID D49C - Module
6A6 → 686 - Every
30 s - Testing
Bits 0 to 31 of the reply, 32 bits.
- Formula
(val ÷ 10)- Range
- 0 to 429496729 km
- Unit
- km
In testing for 2012 to 2017. Not supported for 2011.
Odometer CHRYSLER_ODO_6A9
Pelican can show this parameter as the odometer.
- Request
22 D8 02 - Service 22
DID D802 - Module
6A9 → 689 - Every
30 s - Testing
Bits 0 to 23 of the reply, 24 bits.
- Formula
val- Range
- 0 to 16777215 km
- Unit
- km
In testing for 2012 to 2017. Not supported for 2011.
Odometer CHRYSLER_ODO_V3
Pelican can show this parameter as the odometer.
- Request
22 D4 9C - Service 22
DID D49C - Module
6B4 → 694 - Every
1 s - Testing
Bits 0 to 31 of the reply, 32 bits.
- Formula
(val ÷ 1000)- Range
- 0 to 429496729 km
- Unit
- km
In testing for 2012 to 2017. Not supported for 2011.
Odometer CHRYSLER_ODO_03BC
Pelican can show this parameter as the odometer.
- Request
22 03 BC - Service 22
DID 03BC - Module
7E0 → 7E8 - Every
30 s - Testing
Bits 0 to 31 of the reply, 32 bits.
- Formula
(val ÷ 1000)- Range
- 0 to 4294967 km
- Unit
- km
In testing for 2011 to 2017.
Odometer CHRYSLER_ODO_V2Confirmed
Pelican can show this parameter as the odometer.
- Request
22 04 3B - Service 22
DID 043B - Module
7E0 → 7E8 - Every
30 s - Testing
Example reply from a 2013 Chrysler 200.
Bits 0 to 15 of the reply, 16 bits.
0x5164 = 20836 → (20836 × 8.192) = 170,688.512 mi
- Formula
(val × 8.192)- Range
- 0 to 536862.72 mi
- Unit
- mi
Confirmed for 2011, 2013. In testing for 2012, 2014 to 2017.
Odometer CHRYSLER_ODO_V4
Pelican can show this parameter as the odometer.
- Request
22 30 27 - Service 22
DID 3027 - Module
DA42 → 42 - Every
30 s - Testing
Bits 0 to 23 of the reply, 24 bits.
- Formula
(val × 32187 ÷ 200000)- Range
- 0 to 2700041 km
- Unit
- km
In testing for 2012 to 2017. Not supported for 2011.
Total mileage CHRYSLER_ODO_6A8
Pelican can show this parameter as the odometer.
- Request
22 D4 9C - Service 22
DID D49C - Module
6A8 → 688 - Every
1 s - Testing
Bits 0 to 31 of the reply, 32 bits.
- Formula
val- Range
- 0 to 4294967295 km
- Unit
- km
In testing for 2012 to 2017. Not supported for 2011.
Front left tire pressure
Front left tire pressure CHRYSLER_TP_FL_740
Pelican can show this parameter as the front left tire pressure.
- Request
22 A0 F1 - Service 22
DID A0F1 - Module
740 → 4C0 - Every
15 s - Testing
Bits 0 to 7 of the reply, 8 bits.
- Formula
(val × 0.398)- Range
- 0 to 101.49 psi
- Unit
- psi
In testing for 2012, 2014 to 2017. Not supported for 2011, 2013.
Front left tire pressure CHRYSLER_TP_FL_F
Pelican can show this parameter as the front left tire pressure.
- Request
22 A0 F1 - Service 22
DID A0F1 - Module
740 → 4C0 - Every
15 s - Testing
Bits 0 to 15 of the reply, 16 bits.
- Formula
(val ÷ 10)- Range
- 0 to 6553.5 kPa
- Unit
- kPa
In testing for 2012, 2014 to 2017. Not supported for 2011, 2013.
Front left tire pressure CHRYSLER_TP_FL
Pelican can show this parameter as the front left tire pressure.
- Request
22 A0 F1 - Service 22
DID A0F1 - Module
740 → 4C0 - Every
15 s - Testing
Bits 8 to 15 of the reply, 8 bits.
- Formula
(val ÷ 4)- Range
- 0 to 63.75 psi
- Unit
- psi
In testing for 2012, 2014 to 2017. Not supported for 2011, 2013.
Front left tire pressure CHRYSLER_TP_FL_V3
Pelican can show this parameter as the front left tire pressure.
- Request
22 A0 77 - Service 22
DID A077 - Module
742 → 4C2 - Every
15 s - Testing
Bits 24 to 31 of the reply, 8 bits.
- Formula
val- Range
- 0 to 255 psi
- Unit
- psi
In testing for 2012, 2014 to 2017. Not supported for 2011, 2013.
Front left tire pressure CHRYSLER_TP_FL_7DA
Pelican can show this parameter as the front left tire pressure.
- Request
22 A0 20 - Service 22
DID A020 - Module
7DA → 7E2 - Every
15 s - Testing
Bits 0 to 7 of the reply, 8 bits.
- Formula
(val × 1541 ÷ 4250)- Range
- 0 to 92 psi
- Unit
- psi
In testing for 2012, 2014 to 2017. Not supported for 2011, 2013.
Front left tire pressure CHRYSLER_TP_FL_V2
Pelican can show this parameter as the front left tire pressure.
- Request
22 01 3C - Service 22
DID 013C - Module
DAC7 → C7 - Every
5 s - Testing
Bits 0 to 15 of the reply, 16 bits.
- Formula
(val ÷ 1000)- Range
- 0 to 65.535 bar
- Unit
- bar
In testing for 2012, 2014 to 2017. Not supported for 2011, 2013.
Front left tire pressure, altitude compensated CHRYSLER_TP_FL_AC
Pelican can show this parameter as the front left tire pressure.
- Request
22 A0 A1 - Service 22
DID A0A1 - Module
740 → 4C0 - Every
15 s - Testing
Bits 0 to 7 of the reply, 8 bits.
- Formula
val- Range
- 0 to 255 psi
- Unit
- psi
In testing for 2012, 2014 to 2017. Not supported for 2011, 2013.
Front right tire pressure
Front right tire pressure CHRYSLER_TP_FR_740
Pelican can show this parameter as the front right tire pressure.
- Request
22 A0 F2 - Service 22
DID A0F2 - Module
740 → 4C0 - Every
15 s - Testing
Bits 0 to 7 of the reply, 8 bits.
- Formula
(val × 0.398)- Range
- 0 to 101.49 psi
- Unit
- psi
In testing for 2012, 2014 to 2017. Not supported for 2011, 2013.
Front right tire pressure CHRYSLER_TP_FR_F
Pelican can show this parameter as the front right tire pressure.
- Request
22 A0 F2 - Service 22
DID A0F2 - Module
740 → 4C0 - Every
15 s - Testing
Bits 0 to 15 of the reply, 16 bits.
- Formula
(val ÷ 10)- Range
- 0 to 6553.5 kPa
- Unit
- kPa
In testing for 2012, 2014 to 2017. Not supported for 2011, 2013.
Front right tire pressure CHRYSLER_TP_FR
Pelican can show this parameter as the front right tire pressure.
- Request
22 A0 F2 - Service 22
DID A0F2 - Module
740 → 4C0 - Every
15 s - Testing
Bits 8 to 15 of the reply, 8 bits.
- Formula
(val ÷ 4)- Range
- 0 to 63.75 psi
- Unit
- psi
In testing for 2012, 2014 to 2017. Not supported for 2011, 2013.
Front right tire pressure CHRYSLER_TP_FR_V3
Pelican can show this parameter as the front right tire pressure.
- Request
22 A0 77 - Service 22
DID A077 - Module
742 → 4C2 - Every
15 s - Testing
Bits 32 to 39 of the reply, 8 bits.
- Formula
val- Range
- 0 to 255 psi
- Unit
- psi
In testing for 2012, 2014 to 2017. Not supported for 2011, 2013.
Front right tire pressure CHRYSLER_TP_FR_7DA
Pelican can show this parameter as the front right tire pressure.
- Request
22 A0 21 - Service 22
DID A021 - Module
7DA → 7E2 - Every
15 s - Testing
Bits 0 to 7 of the reply, 8 bits.
- Formula
(val × 1541 ÷ 4250)- Range
- 0 to 92 psi
- Unit
- psi
In testing for 2012, 2014 to 2017. Not supported for 2011, 2013.
Front right tire pressure CHRYSLER_TP_FR_V2
Pelican can show this parameter as the front right tire pressure.
- Request
22 01 3D - Service 22
DID 013D - Module
DAC7 → C7 - Every
5 s - Testing
Bits 0 to 15 of the reply, 16 bits.
- Formula
(val ÷ 1000)- Range
- 0 to 65.535 bar
- Unit
- bar
In testing for 2012, 2014 to 2017. Not supported for 2011, 2013.
Front right tire pressure, altitude compensated CHRYSLER_TP_FR_AC
Pelican can show this parameter as the front right tire pressure.
- Request
22 A0 A1 - Service 22
DID A0A1 - Module
740 → 4C0 - Every
15 s - Testing
Bits 8 to 15 of the reply, 8 bits.
- Formula
val- Range
- 0 to 255 psi
- Unit
- psi
In testing for 2012, 2014 to 2017. Not supported for 2011, 2013.
Rear left tire pressure
Rear left tire pressure CHRYSLER_TP_RL_740
Pelican can show this parameter as the rear left tire pressure.
- Request
22 A0 F4 - Service 22
DID A0F4 - Module
740 → 4C0 - Every
15 s - Testing
Bits 0 to 7 of the reply, 8 bits.
- Formula
(val × 0.398)- Range
- 0 to 101.49 psi
- Unit
- psi
In testing for 2012, 2014 to 2017. Not supported for 2011, 2013.
Rear left tire pressure CHRYSLER_TP_RL_F
Pelican can show this parameter as the rear left tire pressure.
- Request
22 A0 F4 - Service 22
DID A0F4 - Module
740 → 4C0 - Every
15 s - Testing
Bits 0 to 15 of the reply, 16 bits.
- Formula
(val ÷ 10)- Range
- 0 to 6553.5 kPa
- Unit
- kPa
In testing for 2012, 2014 to 2017. Not supported for 2011, 2013.
Rear left tire pressure CHRYSLER_TP_RL
Pelican can show this parameter as the rear left tire pressure.
- Request
22 A0 F4 - Service 22
DID A0F4 - Module
740 → 4C0 - Every
15 s - Testing
Bits 8 to 15 of the reply, 8 bits.
- Formula
(val ÷ 4)- Range
- 0 to 63.75 psi
- Unit
- psi
In testing for 2012, 2014 to 2017. Not supported for 2011, 2013.
Rear left tire pressure CHRYSLER_TP_RL_V3
Pelican can show this parameter as the rear left tire pressure.
- Request
22 A0 77 - Service 22
DID A077 - Module
742 → 4C2 - Every
15 s - Testing
Bits 40 to 47 of the reply, 8 bits.
- Formula
val- Range
- 0 to 255 psi
- Unit
- psi
In testing for 2012, 2014 to 2017. Not supported for 2011, 2013.
Rear left tire pressure CHRYSLER_TP_RL_7DA
Pelican can show this parameter as the rear left tire pressure.
- Request
22 A0 22 - Service 22
DID A022 - Module
7DA → 7E2 - Every
15 s - Testing
Bits 0 to 7 of the reply, 8 bits.
- Formula
(val × 1541 ÷ 4250)- Range
- 0 to 92 psi
- Unit
- psi
In testing for 2012, 2014 to 2017. Not supported for 2011, 2013.
Rear left tire pressure CHRYSLER_TP_RL_V2
Pelican can show this parameter as the rear left tire pressure.
- Request
22 01 3E - Service 22
DID 013E - Module
DAC7 → C7 - Every
5 s - Testing
Bits 0 to 15 of the reply, 16 bits.
- Formula
(val ÷ 1000)- Range
- 0 to 65.535 bar
- Unit
- bar
In testing for 2012, 2014 to 2017. Not supported for 2011, 2013.
Rear left tire pressure, altitude compensated CHRYSLER_TP_RL_AC
Pelican can show this parameter as the rear left tire pressure.
- Request
22 A0 A1 - Service 22
DID A0A1 - Module
740 → 4C0 - Every
15 s - Testing
Bits 24 to 31 of the reply, 8 bits.
- Formula
val- Range
- 0 to 255 psi
- Unit
- psi
In testing for 2012, 2014 to 2017. Not supported for 2011, 2013.
Rear right tire pressure
Rear right tire pressure CHRYSLER_TP_RR_740
Pelican can show this parameter as the rear right tire pressure.
- Request
22 A0 F3 - Service 22
DID A0F3 - Module
740 → 4C0 - Every
15 s - Testing
Bits 0 to 7 of the reply, 8 bits.
- Formula
(val × 0.398)- Range
- 0 to 101.49 psi
- Unit
- psi
In testing for 2012, 2014 to 2017. Not supported for 2011, 2013.
Rear right tire pressure CHRYSLER_TP_RR_F
Pelican can show this parameter as the rear right tire pressure.
- Request
22 A0 F3 - Service 22
DID A0F3 - Module
740 → 4C0 - Every
15 s - Testing
Bits 0 to 15 of the reply, 16 bits.
- Formula
(val ÷ 10)- Range
- 0 to 6553.5 kPa
- Unit
- kPa
In testing for 2012, 2014 to 2017. Not supported for 2011, 2013.
Rear right tire pressure CHRYSLER_TP_RR
Pelican can show this parameter as the rear right tire pressure.
- Request
22 A0 F3 - Service 22
DID A0F3 - Module
740 → 4C0 - Every
15 s - Testing
Bits 8 to 15 of the reply, 8 bits.
- Formula
(val ÷ 4)- Range
- 0 to 63.75 psi
- Unit
- psi
In testing for 2012, 2014 to 2017. Not supported for 2011, 2013.
Rear right tire pressure CHRYSLER_TP_RR_V3
Pelican can show this parameter as the rear right tire pressure.
- Request
22 A0 77 - Service 22
DID A077 - Module
742 → 4C2 - Every
15 s - Testing
Bits 48 to 55 of the reply, 8 bits.
- Formula
val- Range
- 0 to 255 psi
- Unit
- psi
In testing for 2012, 2014 to 2017. Not supported for 2011, 2013.
Rear right tire pressure CHRYSLER_TP_RR_7DA
Pelican can show this parameter as the rear right tire pressure.
- Request
22 A0 23 - Service 22
DID A023 - Module
7DA → 7E2 - Every
15 s - Testing
Bits 0 to 7 of the reply, 8 bits.
- Formula
(val × 1541 ÷ 4250)- Range
- 0 to 92 psi
- Unit
- psi
In testing for 2012, 2014 to 2017. Not supported for 2011, 2013.
Rear right tire pressure CHRYSLER_TP_RR_V2
Pelican can show this parameter as the rear right tire pressure.
- Request
22 01 3F - Service 22
DID 013F - Module
DAC7 → C7 - Every
5 s - Testing
Bits 0 to 15 of the reply, 16 bits.
- Formula
(val ÷ 1000)- Range
- 0 to 65.535 bar
- Unit
- bar
In testing for 2012, 2014 to 2017. Not supported for 2011, 2013.
Rear right tire pressure, altitude compensated CHRYSLER_TP_RR_AC
Pelican can show this parameter as the rear right tire pressure.
- Request
22 A0 A1 - Service 22
DID A0A1 - Module
740 → 4C0 - Every
15 s - Testing
Bits 16 to 23 of the reply, 8 bits.
- Formula
val- Range
- 0 to 255 psi
- Unit
- psi
In testing for 2012, 2014 to 2017. Not supported for 2011, 2013.
CheckEngineLightOn
Malfunction indicator lamp MILSAE J1979Confirmed
The MIL status is OFF during key-on, engine-off bulb check unless MIL has also been commanded ON for a detected malfunction. The status reflects whether there are confirmed DTC(s) stored that are illuminating the MIL. It should not reflect the status of the MIL, which could be on for a function check, flashing I/M readiness or flashing for misfire.
Pelican can show this parameter as the checkEngineLightOn.
- Request
01 01 - Service 01
PID 01 - Module
7E0 → 7E8 - Every
10 s
Bit 0 of the reply.
- Formula
val- Range
- 0 to 1
- Unit
- Off or on
Confirmed for 2013. Supported for 2011, 2015.
Commanded lambda
Commanded equivalence ratio EQ_RATSAE J1979Confirmed
Fuel systems that utilize conventional oxygen sensor display the inverse of the commanded open loop equivalence ratio (also known as lambda) while the fuel control system is in open loop. Will indicate 1.000 while in closed-loop fuel.
Pelican can show this parameter as the commanded lambda.
- Request
01 44 - Service 01
PID 44 - Module
7E0 → 7E8 - Every
250 ms
Bits 0 to 15 of the reply, 16 bits.
- Formula
(val × 2 ÷ 65535)- Range
- 0 to 1.99
- Unit
- Number
Confirmed for 2011, 2013. Supported for 2015.
Distance since trouble codes were cleared
Distance traveled since diagnostic trouble codes cleared CLR_DISTSAE J1979Confirmed
Distance accumulated since DTCs were cleared (via an external test equipment or possibly, a battery disconnect). This parameter is not associated with any particular DTC. It is simply an indication for inspection/maintenance, of the last time an external test equipment was used to clear DTCs. If greater than 65,535 km have occurred, will remain at 65,535 km and not wrap to zero.
Pelican can show this parameter as the distance since trouble codes were cleared.
- Request
01 31 - Service 01
PID 31 - Module
7E0 → 7E8 - Every
15 s
Bits 0 to 15 of the reply, 16 bits.
- Formula
val- Range
- 0 to 65535 km
- Unit
- km
Confirmed for 2011, 2013. Supported for 2015.
Engine coolant temperature
Coolant temperature CHRYSLER_ECT_V2
Pelican can show this parameter as the engine coolant temperature.
- Request
22 D8 FB - Service 22
DID D8FB - Module
6A2 → 682 - Every
5 s - Testing
Bits 0 to 15 of the reply, 16 bits. The value is signed.
- Formula
(val ÷ 10)- Range
- -3276 to 3276 °C
- Unit
- °C
In testing for 2012 to 2017. Not supported for 2011.
Coolant temperature CHRYSLER_ECT_6A8
Pelican can show this parameter as the engine coolant temperature.
- Request
22 D4 15 - Service 22
DID D415 - Module
6A8 → 688 - Every
5 s - Testing
Bits 0 to 15 of the reply, 16 bits. The value is signed.
- Formula
(val ÷ 10 − 273.1400146)- Range
- -3549 to 3003 °C
- Unit
- °C
In testing for 2012 to 2017. Not supported for 2011.
Engine coolant temperature ECTSAE J1979Confirmed
Your engine temperature must operate within a certain temperature range to operate efficiently and safely. If it runs too hot, then your engine could be permanently damaged. If it runs too cold, then your engine will use more fuel than necessary.
Pelican can show this parameter as the engine coolant temperature.
- Request
01 05 - Service 01
PID 05 - Module
7E0 → 7E8 - Every
500 ms
Bits 0 to 7 of the reply, 8 bits.
- Formula
(val − 40)- Range
- -40 to 215 °C
- Unit
- °C
Confirmed for 2011, 2013. Supported for 2015.
Engine load
Calculated engine load LOAD_PCTSAE J1979Confirmed
Represents the amount of work the engine is doing. Expected to reach 100% at wide open throttle/wide open pedal at any altitude, temperature or rpm for both naturally aspirated and boosted engines. If engine load is limited for powertrain protection e.g. engine/turbocharger protection, this value may not reach 100%. For hybrid vehicles, indicates the torque produced only by the internal combustion engine, not the torque being delivered by the entire powertrain. For electric vehicles, the meaning of this parameter is undefined.
Pelican can show this parameter as the engine load.
- Request
01 04 - Service 01
PID 04 - Module
7E0 → 7E8 - Every
250 ms
Bits 0 to 7 of the reply, 8 bits.
- Formula
(val × 100 ÷ 255)- Range
- 0 to 100 %
- Unit
- %
Confirmed for 2011, 2013. Supported for 2015.
Engine oil temperature
Engine oil temperature CHRYSLER_EOT_212DConfirmed
Pelican can show this parameter as the engine oil temperature.
- Request
21 2D - Service 21
PID 2D - Module
7E0 → 7E8 - Every
5 s - Testing
Example reply from a 2013 Chrysler 200.
Bits 56 to 63 of the reply, 8 bits.
0x97 = 151 → (151 × 9 ÷ 5 − 83) = 188.8 °F
- Formula
(val × 9 ÷ 5 − 83)- Range
- -83 to 376 °F
- Unit
- °F
Confirmed for 2011, 2013. In testing for 2012, 2014 to 2017.
Engine oil temperature CHRYSLER_EOT_V2
Pelican can show this parameter as the engine oil temperature.
- Request
22 01 68 - Service 22
DID 0168 - Module
7E0 → 7E8 - Every
5 s - Testing
Bits 160 to 175 of the reply, 16 bits. The value is signed.
- Formula
(val ÷ 10 − 273.14)- Range
- -3549.94 to 3003.56 °C
- Unit
- °C
In testing for 2011 to 2017.
Oil temperature CHRYSLER_OIL_T
Pelican can show this parameter as the engine oil temperature.
- Request
22 D4 7D - Service 22
DID D47D - Module
6A8 → 688 - Every
5 s - Testing
Bits 0 to 15 of the reply, 16 bits. The value is signed.
- Formula
(val ÷ 10 − 273.1400146)- Range
- -3549 to 3003 °C
- Unit
- °C
In testing for 2012 to 2017. Not supported for 2011.
Engine speed
Engine RPM CHRYSLER_RPM_V2
Pelican can show this parameter as the engine speed.
- Request
22 D4 00 - Service 22
DID D400 - Module
6A8 → 688 - Every
250 ms - Testing
Bits 0 to 15 of the reply, 16 bits.
- Formula
val- Range
- 0 to 65535 rpm
- Unit
- rpm
In testing for 2012 to 2017. Not supported for 2011.
Engine RPM CHRYSLER_RPM_6A9
Pelican can show this parameter as the engine speed.
- Request
21 C5 - Service 21
PID C5 - Module
6A9 → 689 - Every
250 ms - Testing
Bits 40 to 47 of the reply, 8 bits.
- Formula
(val × 32)- Range
- 0 to 8160 rpm
- Unit
- rpm
In testing for 2012 to 2017. Not supported for 2011.
Front left tire temperature
Front left tire temperature CHRYSLER_TT_FL_740
Pelican can show this parameter as the front left tire temperature.
- Request
22 A0 F1 - Service 22
DID A0F1 - Module
740 → 4C0 - Every
15 s - Testing
Bits 8 to 15 of the reply, 8 bits.
- Formula
(val − 50)- Range
- -50 to 205 °C
- Unit
- °C
In testing for 2012, 2014 to 2017. Not supported for 2011, 2013.
Front left tire temperature CHRYSLER_TT_FL
Pelican can show this parameter as the front left tire temperature.
- Request
22 A0 F1 - Service 22
DID A0F1 - Module
740 → 4C0 - Every
15 s - Testing
Bits 16 to 23 of the reply, 8 bits.
- Formula
(val − 50)- Range
- -50 to 205 °C
- Unit
- °C
In testing for 2012, 2014 to 2017. Not supported for 2011, 2013.
Front left tire temperature CHRYSLER_TT_FL_V2
Pelican can show this parameter as the front left tire temperature.
- Request
22 01 3C - Service 22
DID 013C - Module
DAC7 → C7 - Every
5 s - Testing
Bits 16 to 23 of the reply, 8 bits.
- Formula
(val − 50)- Range
- -50 to 205 °C
- Unit
- °C
In testing for 2012, 2014 to 2017. Not supported for 2011, 2013.
Front right tire temperature
Front right tire temperature CHRYSLER_TT_FR_740
Pelican can show this parameter as the front right tire temperature.
- Request
22 A0 F2 - Service 22
DID A0F2 - Module
740 → 4C0 - Every
15 s - Testing
Bits 8 to 15 of the reply, 8 bits.
- Formula
(val − 50)- Range
- -50 to 205 °C
- Unit
- °C
In testing for 2012, 2014 to 2017. Not supported for 2011, 2013.
Front right tire temperature CHRYSLER_TT_FR
Pelican can show this parameter as the front right tire temperature.
- Request
22 A0 F2 - Service 22
DID A0F2 - Module
740 → 4C0 - Every
15 s - Testing
Bits 16 to 23 of the reply, 8 bits.
- Formula
(val − 50)- Range
- -50 to 205 °C
- Unit
- °C
In testing for 2012, 2014 to 2017. Not supported for 2011, 2013.
Front right tire temperature CHRYSLER_TT_FR_V2
Pelican can show this parameter as the front right tire temperature.
- Request
22 01 3D - Service 22
DID 013D - Module
DAC7 → C7 - Every
5 s - Testing
Bits 16 to 23 of the reply, 8 bits.
- Formula
(val − 50)- Range
- -50 to 205 °C
- Unit
- °C
In testing for 2012, 2014 to 2017. Not supported for 2011, 2013.
Rear left tire temperature
Rear left tire temperature CHRYSLER_TT_RL_740
Pelican can show this parameter as the rear left tire temperature.
- Request
22 A0 F4 - Service 22
DID A0F4 - Module
740 → 4C0 - Every
15 s - Testing
Bits 8 to 15 of the reply, 8 bits.
- Formula
(val − 50)- Range
- -50 to 205 °C
- Unit
- °C
In testing for 2012, 2014 to 2017. Not supported for 2011, 2013.
Rear left tire temperature CHRYSLER_TT_RL
Pelican can show this parameter as the rear left tire temperature.
- Request
22 A0 F4 - Service 22
DID A0F4 - Module
740 → 4C0 - Every
15 s - Testing
Bits 16 to 23 of the reply, 8 bits.
- Formula
(val − 50)- Range
- -50 to 205 °C
- Unit
- °C
In testing for 2012, 2014 to 2017. Not supported for 2011, 2013.
Rear left tire temperature CHRYSLER_TT_RL_V2
Pelican can show this parameter as the rear left tire temperature.
- Request
22 01 3E - Service 22
DID 013E - Module
DAC7 → C7 - Every
5 s - Testing
Bits 16 to 23 of the reply, 8 bits.
- Formula
(val − 50)- Range
- -50 to 205 °C
- Unit
- °C
In testing for 2012, 2014 to 2017. Not supported for 2011, 2013.
Rear right tire temperature
Rear right tire temperature CHRYSLER_TT_RR_740
Pelican can show this parameter as the rear right tire temperature.
- Request
22 A0 F3 - Service 22
DID A0F3 - Module
740 → 4C0 - Every
15 s - Testing
Bits 8 to 15 of the reply, 8 bits.
- Formula
(val − 50)- Range
- -50 to 205 °C
- Unit
- °C
In testing for 2012, 2014 to 2017. Not supported for 2011, 2013.
Rear right tire temperature CHRYSLER_TT_RR
Pelican can show this parameter as the rear right tire temperature.
- Request
22 A0 F3 - Service 22
DID A0F3 - Module
740 → 4C0 - Every
15 s - Testing
Bits 16 to 23 of the reply, 8 bits.
- Formula
(val − 50)- Range
- -50 to 205 °C
- Unit
- °C
In testing for 2012, 2014 to 2017. Not supported for 2011, 2013.
Rear right tire temperature CHRYSLER_TT_RR_V2
Pelican can show this parameter as the rear right tire temperature.
- Request
22 01 3F - Service 22
DID 013F - Module
DAC7 → C7 - Every
5 s - Testing
Bits 16 to 23 of the reply, 8 bits.
- Formula
(val − 50)- Range
- -50 to 205 °C
- Unit
- °C
In testing for 2012, 2014 to 2017. Not supported for 2011, 2013.
Short term fuel trim
Short term fuel trim (bank 1) SHRTFT1SAE J1979Confirmed
Correction being used by the closed-loop fuel algorithm.
Pelican can show this parameter as the short term fuel trim.
- Request
01 06 - Service 01
PID 06 - Module
7E0 → 7E8 - Every
250 ms
Bits 0 to 7 of the reply, 8 bits.
- Formula
(val × 100 ÷ 128 − 100)- Range
- -100 to 99.2 %
- Unit
- %
Confirmed for 2011, 2013. Supported for 2015.
Short term fuel trim (bank 2) SHRTFT2SAE J1979Confirmed
Correction being used by the closed-loop fuel algorithm.
Pelican can show this parameter as the short term fuel trim.
- Request
01 08 - Service 01
PID 08 - Module
7E0 → 7E8 - Every
1 s
Bits 0 to 7 of the reply, 8 bits.
- Formula
(val × 100 ÷ 128 − 100)- Range
- -100 to 99.2 %
- Unit
- %
Confirmed for 2013.
Starter battery voltage
12V battery voltage CHRYSLER_AUX_BAT_V
Pelican can show this parameter as the starter battery voltage.
- Request
22 A0 42 - Service 22
DID A042 - Module
DA44 → 44 - Every
1 s - Testing
Bits 0 to 15 of the reply, 16 bits.
- Formula
(val ÷ 1000)- Range
- 0 to 65.53 V
- Unit
- V
In testing for 2012 to 2017. Not supported for 2011.
Battery voltage, BCM CHRYSLER_BCM_BAT_V
Pelican can show this parameter as the starter battery voltage.
- Request
22 10 04 - Service 22
DID 1004 - Module
DA40 → 40 - Every
30 s - Testing
Bits 0 to 7 of the reply, 8 bits.
- Formula
(val ÷ 10)- Range
- 0 to 25.5 V
- Unit
- V
In testing for 2012, 2014 to 2017. Not supported for 2011, 2013.
Battery voltage, body computer CHRYSLER_BATT_V_BCM
Pelican can show this parameter as the starter battery voltage.
- Request
22 10 04 - Service 22
DID 1004 - Module
DA40 → 40 - Every
30 s - Testing
Bits 0 to 7 of the reply, 8 bits.
- Formula
(val ÷ 5)- Range
- 0 to 51 V
- Unit
- V
In testing for 2012, 2014 to 2017. Not supported for 2011, 2013.
Control module voltage VPWRSAE J1979Confirmed
Power input to the OBD control module. VPWR is normally battery voltage, less any voltage drop in the circuit between the battery and the control module.
Pelican can show this parameter as the starter battery voltage.
- Request
01 42 - Service 01
PID 42 - Module
7E0 → 7E8 - Every
10 s
Bits 0 to 15 of the reply, 16 bits.
- Formula
(val ÷ 1000)- Range
- 0 to 65535 V
- Unit
- V
Confirmed for 2013. Supported for 2011, 2015.
Engine control computer supply voltage CHRYSLER_ENG_CTRL_COMPUTER_V
Pelican can show this parameter as the starter battery voltage.
- Request
22 D4 22 - Service 22
DID D422 - Module
6A8 → 688 - Every
5 s - Testing
Bits 0 to 15 of the reply, 16 bits. The value is signed.
- Formula
(val ÷ 100.0000022)- Range
- -327 to 327 V
- Unit
- V
In testing for 2012 to 2017. Not supported for 2011.
Service battery voltage CHRYSLER_SERVICE_BAT_V
Pelican can show this parameter as the starter battery voltage.
- Request
22 D7 8A - Service 22
DID D78A - Module
6A8 → 688 - Every
5 s - Testing
Bits 0 to 15 of the reply, 16 bits.
- Formula
(val ÷ 128)- Range
- 0 to 511 V
- Unit
- V
In testing for 2012 to 2017. Not supported for 2011.
StoredDTCCount
Number of DTCs stored in this ECU DTC_CNTSAE J1979Confirmed
Number of confirmed emission-related DTCs stored in the ECU available for display using Service $03.
Pelican can show this parameter as the storedDTCCount.
- Request
01 01 - Service 01
PID 01 - Module
7E0 → 7E8 - Every
10 s
Bits 1 to 7 of the reply, 7 bits.
- Formula
val- Range
- 0 to 127
- Unit
- Number
Confirmed for 2013. Supported for 2011, 2015.
Throttle position
Absolute throttle position TPSAE J1979Confirmed
Throttle position at idle will usually be more than 0%, and throttle position at wide open throttle will usually be less than 100%.
Pelican can show this parameter as the throttle position.
- Request
01 11 - Service 01
PID 11 - Module
7E0 → 7E8 - Every
250 ms
Bits 0 to 7 of the reply, 8 bits.
- Formula
(val × 100 ÷ 255)- Range
- 0 to 100 %
- Unit
- %
Confirmed for 2013. Supported for 2011, 2015.
Absolute throttle position B TP_BSAE J1979Confirmed
Pelican can show this parameter as the throttle position.
- Request
01 47 - Service 01
PID 47 - Module
7E0 → 7E8 - Every
250 ms
Bits 0 to 7 of the reply, 8 bits.
- Formula
(val × 100 ÷ 255)- Range
- 0 to 100 %
- Unit
- %
Confirmed for 2013. Supported for 2015.
Traction battery current
HV battery current CHRYSLER_HVBAT_CURRENT
Pelican can show this parameter as the traction battery current.
- Request
22 A0 0A - Service 22
DID A00A - Module
DA44 → 44 - Every
1 s - Testing
Bits 0 to 15 of the reply, 16 bits.
- Formula
(val ÷ 20 − 1638.4)- Range
- -1638 to 1638 A
- Unit
- A
In testing for 2012 to 2017. Not supported for 2011.
Traction battery voltage
Battery voltage, cell sum CHRYSLER_BAT_V_CELL_SUM
Pelican can show this parameter as the traction battery voltage.
- Request
22 A0 11 - Service 22
DID A011 - Module
DA44 → 44 - Every
5 s - Testing
Bits 0 to 15 of the reply, 16 bits.
- Formula
(val ÷ 10)- Range
- 0 to 6553 V
- Unit
- V
In testing for 2012 to 2017. Not supported for 2011.
Transmission fluid temperature
Automatic transmission fluid temperature CHRYSLER_AUTOMATIC_ATF_T
Pelican can show this parameter as the transmission fluid temperature.
- Request
22 D5 50 - Service 22
DID D550 - Module
6A9 → 689 - Every
5 s - Testing
Bits 0 to 7 of the reply, 8 bits.
- Formula
(val − 40)- Range
- -40 to 215 °C
- Unit
- °C
In testing for 2012 to 2017. Not supported for 2011.
Automatic transmission fluid temperature CHRYSLER_ATF_T_3RDGEN_V2
Pelican can show this parameter as the transmission fluid temperature.
- Request
21 5C - Service 21
PID 5C - Module
7E1 → 7E9 - Every
1 s - Testing
Bits 32 to 39 of the reply, 8 bits.
- Formula
(val − 50)- Range
- -50 to 205 °C
- Unit
- °C
In testing for 2012, 2014 to 2017. Not supported for 2011, 2013.
Automatic transmission temperature CHRYSLER_ATF_T_DA18
Pelican can show this parameter as the transmission fluid temperature.
- Request
22 1D 09 - Service 22
DID 1D09 - Module
DA18 - Every
1 s - Testing
Bits 0 to 7 of the reply, 8 bits.
- Formula
(val − 50)- Range
- -50 to 205 °C
- Unit
- °C
In testing for 2012, 2014 to 2017. Not supported for 2011, 2013.
Transmission fluid temperature CHRYSLER_ATF_T_V3
Pelican can show this parameter as the transmission fluid temperature.
- Request
21 C5 - Service 21
PID C5 - Module
6A9 → 689 - Every
250 ms - Testing
Bits 168 to 175 of the reply, 8 bits.
- Formula
(val − 50)- Range
- -50 to 205 °C
- Unit
- °C
In testing for 2012 to 2017. Not supported for 2011.
Transmission fluid temperature CHRYSLER_ATF_T_2118
Pelican can show this parameter as the transmission fluid temperature.
- Request
21 18 - Service 21
PID 18 - Module
7E1 → 7E9 - Every
1 s - Testing
Bits 0 to 15 of the reply, 16 bits.
- Formula
(val ÷ 64 − 40)- Range
- -40 to 983 °F
- Unit
- °F
In testing for 2012, 2014 to 2017. Not supported for 2011, 2013.
Transmission fluid temperature CHRYSLER_ATF_T_08DF
Pelican can show this parameter as the transmission fluid temperature.
- Request
22 08 DF - Service 22
DID 08DF - Module
7E1 → 7E9 - Every
5 s - Testing
Bits 0 to 7 of the reply, 8 bits.
- Formula
(val − 40)- Range
- -40 to 215 °C
- Unit
- °C
In testing for 2012, 2014 to 2017. Not supported for 2011, 2013.
Transmission fluid temperature CHRYSLER_ATF_T_7E1_V3
Pelican can show this parameter as the transmission fluid temperature.
- Request
22 50 43 - Service 22
DID 5043 - Module
7E1 → 7E9 - Every
5 s - Testing
Bits 0 to 7 of the reply, 8 bits.
- Formula
(val − 40)- Range
- -40 to 215 °C
- Unit
- °C
In testing for 2012 to 2017. Not supported for 2011.
Transmission fluid temperature CHRYSLER_ATF_T_4THGEN
Pelican can show this parameter as the transmission fluid temperature.
- Request
22 04 FE - Service 22
DID 04FE - Module
DA18 → 18 - Every
5 s - Testing
Bits 0 to 7 of the reply, 8 bits.
- Formula
(val − 40)- Range
- -40 to 215 °C
- Unit
- °C
In testing for 2012, 2014 to 2017. Not supported for 2011, 2013.
Transmission fluid temperature, variant 1 CHRYSLER_ATF_T_VAR_1_V3
Pelican can show this parameter as the transmission fluid temperature.
- Request
21 72 - Service 21
PID 72 - Module
7E1 → 7E9 - Every
5 s - Testing
Bits 32 to 47 of the reply, 16 bits.
- Formula
(val ÷ 64)- Range
- 0 to 1023.9843 °F
- Unit
- °F
In testing for 2012, 2014 to 2017. Not supported for 2011, 2013.
Transmission fluid temperature, variant 2 CHRYSLER_ATF_T_V_2Confirmed
Pelican can show this parameter as the transmission fluid temperature.
- Request
21 18 - Service 21
PID 18 - Module
7E0 → 7E8 - Every
5 s - Testing
Example reply from a 2011 Chrysler 200.
Bits 0 to 15 of the reply, 16 bits.
0x13EB = 5099 → (5099 ÷ 64) = 79.671875 °F
- Formula
(val ÷ 64)- Range
- 0 to 1023 °F
- Unit
- °F
Confirmed for 2011. In testing for 2012 to 2017.
Transmission fluid temperature, variant 3 CHRYSLER_ATF_T_VAR_3Confirmed
Pelican can show this parameter as the transmission fluid temperature.
- Request
22 B0 10 - Service 22
DID B010 - Module
7E0 → 7E8 - Every
5 s - Testing
Example reply from a 2013 Chrysler 200.
Bits 0 to 15 of the reply, 16 bits.
0x18F0 = 6384 → (6384 ÷ 64) = 99.75 °F
- Formula
(val ÷ 64)- Range
- 0 to 1023.9843 °F
- Unit
- °F
Confirmed for 2011, 2013. In testing for 2012, 2014 to 2017.
Transmission fluid temperature, variant 3 CHRYSLER_ATF_T_2130
Pelican can show this parameter as the transmission fluid temperature.
- Request
21 30 - Service 21
PID 30 - Module
7E1 → 7E9 - Every
5 s - Testing
Bits 88 to 95 of the reply, 8 bits.
- Formula
(val − 50)- Range
- -50 to 205 °C
- Unit
- °C
In testing for 2012, 2014 to 2017. Not supported for 2011, 2013.
Transmission oil temperature CHRYSLER_TOT
Pelican can show this parameter as the transmission fluid temperature.
- Request
21 18 - Service 21
PID 18 - Module
DA10 → 10 - Every
1 s - Testing
Bits 0 to 15 of the reply, 16 bits. The value is signed.
- Formula
(val ÷ 4)- Range
- -512 to 512 °F
- Unit
- °F
In testing for 2012, 2014 to 2017. Not supported for 2011, 2013.
Transmission sump temperature CHRYSLER_TRANS_SUMP_T_7E1
Pelican can show this parameter as the transmission fluid temperature.
- Request
21 3A - Service 21
PID 3A - Module
7E1 → 7E9 - Every
5 s - Testing
Bits 72 to 87 of the reply, 16 bits.
- Formula
(val ÷ 64)- Range
- 0 to 1023 °F
- Unit
- °F
In testing for 2012 to 2017. Not supported for 2011.
Transmission temperature CHRYSLER_ATF_T
Pelican can show this parameter as the transmission fluid temperature.
- Request
22 04 FE - Service 22
DID 04FE - Module
7E1 → 7E9 - Every
1 s - Testing
Bits 0 to 7 of the reply, 8 bits.
- Formula
(val × 1.8 − 40)- Range
- -30 to 300 °F
- Unit
- °F
In testing for 2012, 2014 to 2017. Not supported for 2011, 2013.
Transmission temperature, variant 2 CHRYSLER_TRANS_T_VAR_2
Pelican can show this parameter as the transmission fluid temperature.
- Request
21 0A - Service 21
PID 0A - Module
7E1 → 7E9 - Every
5 s - Testing
Bits 128 to 135 of the reply, 8 bits.
- Formula
(val × 9 ÷ 5 − 58)- Range
- -58 to 401 °F
- Unit
- °F
In testing for 2012 to 2017. Not supported for 2011.
