MG Comet

Trip parameters

The MG Comet has 3 trip parameters.

● Confirmed◆ In testing○ Supported× Not supported

How to read a parameter card

Odometer MG_GWM_ODO

Pelican can show this parameter as the odometer.

  • Request22 B9 21
  • Service 22DID B921
  • Module710 → 718
  • Every1 s
  • Testing

Bits 0 to 23 of the reply, 24 bits.

Formula
val
Range
0 to 16777215 km
Unit
km

In testing for 2023, 2025 to 2026. Not supported for 2024.

  1. The parameter's name and its ID in the OBDb. Confirmed shows when a response from a real car confirms the parameter.
  2. The clutch mark shows a Connectable, a parameter that Pelican surfaces in its interface.
  3. The service and PID/DID asked for, the control module it's sent to, and how often Pelican asks.
  4. The reply's bytes. The parameter's bytes are blue. Bytes for other parameters in the same reply are grayed out. Hover over a byte to see the parameter it represents.
  5. Where the parameter is in the response, and how Pelican converts the raw value into a value.
  6. A real reply, decoded. The raw value comes first, then the reading.
  7. Which model years have tested this parameter.

Odometer MG_GWM_ODO

Pelican can show this parameter as the odometer.

  • Request22 B9 21
  • Service 22DID B921
  • Module710 → 718
  • Every1 s
  • Testing

Bits 0 to 23 of the reply, 24 bits.

Formula
val
Range
0 to 16777215 km
Unit
km

In testing for 2023, 2025 to 2026. Not supported for 2024.

Odometer MG_ODO_V2

Pelican can show this parameter as the odometer.

  • Request22 B1 01
  • Service 22DID B101
  • Module760 → 768
  • Every1 s
  • Testing

Bits 0 to 23 of the reply, 24 bits.

Formula
val
Range
0 to 16777215 km
Unit
km

In testing for 2023 to 2026.

Odometer, body control module MG_BCM_ODO

  • Request22 E1 01
  • Service 22DID E101
  • Module740
  • Every30 s
  • Testing

Bits 0 to 23 of the reply, 24 bits.

Formula
val
Range
0 to 16777215 km
Unit
km

In testing for 2023 to 2026.

Keyboard shortcuts

jk/↓↑
Move down or up through a list or a grid.
hl/←→
Move across a row or between cards.
Enter
Open the focused link.
f
Open the current focus area's filter.
↓
In a filter, move to the first result.
Esc
Close a filter or a dialog.
?
Show these shortcuts.