Pelican
Get the app

Toyota Yaris iA

DTC parameters

The Toyota Yaris iA has 25 DTC parameters.

● Confirmed◆ In testing○ Supported× Not supported

How to read a parameter card

Number of DTCs YARIS_IA_DTC_CNTDConfirmed

  • Request22 02 02
  • Service 22DID 0202
  • Module7E0 → 7E8
  • Every3600 s
  • Testing for 2016 to 2017, 2019 to 2020

Example reply from a 2018 Toyota Yaris iA.

Bits 0 to 7 of the reply, 8 bits.

0x00 = 0 → 0

Formula
val
Range
0 to 255
Unit
Number

Confirmed for 2018. In testing for 2016 to 2017, 2019 to 2020.

  1. The parameter's name and its ID in the OBDb. Confirmed shows when a response from a real car confirms the parameter.
  2. The clutch mark shows a Connectable, a parameter that Pelican surfaces in its interface.
  3. The service and PID/DID asked for, the control module it's sent to, and how often Pelican asks.
  4. The reply's bytes. The parameter's bytes are blue. Bytes for other parameters in the same reply are grayed out. Hover over a byte to see the parameter it represents.
  5. Where the parameter is in the response, and how Pelican converts the raw value into a value.
  6. A real reply, decoded. The raw value comes first, then the reading.
  7. Which model years have tested this parameter.

Distance traveled since diagnostic trouble codes cleared CLR_DISTSAE J1979Confirmed

Distance accumulated since DTCs were cleared (via an external test equipment or possibly, a battery disconnect). This parameter is not associated with any particular DTC. It is simply an indication for inspection/maintenance, of the last time an external test equipment was used to clear DTCs. If greater than 65,535 km have occurred, will remain at 65,535 km and not wrap to zero.

Pelican can show this parameter as the distance since trouble codes were cleared.

  • Request01 31
  • Service 01PID 31
  • Module7E0 → 7E8
  • Every15 s

Bits 0 to 15 of the reply, 16 bits.

Formula
val
Range
0 to 65535 km
Unit
km

Confirmed for 2018. Supported for 2017.

Number of DTCs YARIS_IA_DTC_CNTDConfirmed

  • Request22 02 02
  • Service 22DID 0202
  • Module7E0 → 7E8
  • Every3600 s
  • Testing for 2016 to 2017, 2019 to 2020

Example reply from a 2018 Toyota Yaris iA.

Bits 0 to 7 of the reply, 8 bits.

0x00 = 0 → 0

Formula
val
Range
0 to 255
Unit
Number

Confirmed for 2018. In testing for 2016 to 2017, 2019 to 2020.

DTCs › Status

A/C system refrigerant monitoring ACRF_ENASAE J1979Confirmed

  • Request01 41
  • Service 01PID 41
  • Module7E0 → 7E8
  • Every1 s

Bit 19 of the reply.

Formula
val
Range
0 to 1
Unit
No or yes

Confirmed for 2018. Supported for 2017.

A/C system refrigerant monitoring completed ACRFCMPLSAE J1979Confirmed

  • Request01 41
  • Service 01PID 41
  • Module7E0 → 7E8
  • Every1 s

Bit 27 of the reply.

Formula
val
Range
0 to 1
Unit
Yes or no

Confirmed for 2018. Supported for 2017.

Catalyst monitoring CAT_ENASAE J1979Confirmed

  • Request01 41
  • Service 01PID 41
  • Module7E0 → 7E8
  • Every1 s

Bit 23 of the reply.

Formula
val
Range
0 to 1
Unit
No or yes

Confirmed for 2018. Supported for 2017.

Catalyst monitoring completed CAT_CMPLSAE J1979Confirmed

  • Request01 41
  • Service 01PID 41
  • Module7E0 → 7E8
  • Every1 s

Bit 31 of the reply.

Formula
val
Range
0 to 1
Unit
Yes or no

Confirmed for 2018. Supported for 2017.

Comprehensive component monitoring completed CCM_CMPLSAE J1979Confirmed

  • Request01 41
  • Service 01PID 41
  • Module7E0 → 7E8
  • Every1 s

Bit 9 of the reply.

Formula
val
Range
0 to 1
Unit
Yes or no

Confirmed for 2018. Supported for 2017.

EGR system monitoring EGR_ENASAE J1979Confirmed

  • Request01 41
  • Service 01PID 41
  • Module7E0 → 7E8
  • Every1 s

Bit 16 of the reply.

Formula
val
Range
0 to 1
Unit
No or yes

Confirmed for 2018. Supported for 2017.

EGR system monitoring completed EGR_CMPLSAE J1979Confirmed

  • Request01 41
  • Service 01PID 41
  • Module7E0 → 7E8
  • Every1 s

Bit 24 of the reply.

Formula
val
Range
0 to 1
Unit
Yes or no

Confirmed for 2018. Supported for 2017.

Evaporative system monitoring EVAP_ENASAE J1979Confirmed

  • Request01 41
  • Service 01PID 41
  • Module7E0 → 7E8
  • Every1 s

Bit 21 of the reply.

Formula
val
Range
0 to 1
Unit
No or yes

Confirmed for 2018. Supported for 2017.

Evaporative system monitoring completed EVAPCMPLSAE J1979Confirmed

  • Request01 41
  • Service 01PID 41
  • Module7E0 → 7E8
  • Every1 s

Bit 29 of the reply.

Formula
val
Range
0 to 1
Unit
Yes or no

Confirmed for 2018. Supported for 2017.

Fuel system monitoring completed FUEL_CMPLSAE J1979Confirmed

  • Request01 41
  • Service 01PID 41
  • Module7E0 → 7E8
  • Every1 s

Bit 10 of the reply.

Formula
val
Range
0 to 1
Unit
Yes or no

Confirmed for 2018. Supported for 2017.

Heated catalyst monitoring HCAT_ENASAE J1979Confirmed

  • Request01 41
  • Service 01PID 41
  • Module7E0 → 7E8
  • Every1 s

Bit 22 of the reply.

Formula
val
Range
0 to 1
Unit
No or yes

Confirmed for 2018. Supported for 2017.

Heated catalyst monitoring completed HCATCMPLSAE J1979Confirmed

  • Request01 41
  • Service 01PID 41
  • Module7E0 → 7E8
  • Every1 s

Bit 30 of the reply.

Formula
val
Range
0 to 1
Unit
Yes or no

Confirmed for 2018. Supported for 2017.

Misfire monitoring completed MIS_CMPLSAE J1979Confirmed

  • Request01 41
  • Service 01PID 41
  • Module7E0 → 7E8
  • Every1 s

Bit 11 of the reply.

Formula
val
Range
0 to 1
Unit
Yes or no

Confirmed for 2018. Supported for 2017.

Oxygen sensor heater monitoring HTR_ENASAE J1979Confirmed

  • Request01 41
  • Service 01PID 41
  • Module7E0 → 7E8
  • Every1 s

Bit 17 of the reply.

Formula
val
Range
0 to 1
Unit
No or yes

Confirmed for 2018. Supported for 2017.

Oxygen sensor heater monitoring completed HTR_CMPLSAE J1979Confirmed

  • Request01 41
  • Service 01PID 41
  • Module7E0 → 7E8
  • Every1 s

Bit 25 of the reply.

Formula
val
Range
0 to 1
Unit
Yes or no

Confirmed for 2018. Supported for 2017.

Oxygen sensor monitoring O2S_ENASAE J1979Confirmed

  • Request01 41
  • Service 01PID 41
  • Module7E0 → 7E8
  • Every1 s

Bit 18 of the reply.

Formula
val
Range
0 to 1
Unit
No or yes

Confirmed for 2018. Supported for 2017.

Oxygen sensor monitoring completed O2S_CMPLSAE J1979Confirmed

  • Request01 41
  • Service 01PID 41
  • Module7E0 → 7E8
  • Every1 s

Bit 26 of the reply.

Formula
val
Range
0 to 1
Unit
Yes or no

Confirmed for 2018. Supported for 2017.

Secondary air system monitoring AIR_ENASAE J1979Confirmed

  • Request01 41
  • Service 01PID 41
  • Module7E0 → 7E8
  • Every1 s

Bit 20 of the reply.

Formula
val
Range
0 to 1
Unit
No or yes

Confirmed for 2018. Supported for 2017.

Secondary air system monitoring completed AIR_CMPLSAE J1979Confirmed

  • Request01 41
  • Service 01PID 41
  • Module7E0 → 7E8
  • Every1 s

Bit 28 of the reply.

Formula
val
Range
0 to 1
Unit
Yes or no

Confirmed for 2018. Supported for 2017.

DTCs › Support

Comprehensive component monitoring enabled CCM_ENASAE J1979Confirmed

  • Request01 41
  • Service 01PID 41
  • Module7E0 → 7E8
  • Every1 s

Bit 13 of the reply.

Formula
val
Range
0 to 1
Unit
No or yes

Confirmed for 2018. Supported for 2017.

Compression ignition monitoring supported CIM_SUP_FLAGSAE J1979Confirmed

  • Request01 41
  • Service 01PID 41
  • Module7E0 → 7E8
  • Every1 s

Bit 12 of the reply.

Unit
Named states
States
Raw valueStateMeaning
0SPARKSpark ignition monitors supported
1COMPRESSIONCompression ignition monitors supported

Confirmed for 2018. Supported for 2017.

Fuel system monitoring enabled FUEL_ENASAE J1979Confirmed

  • Request01 41
  • Service 01PID 41
  • Module7E0 → 7E8
  • Every1 s

Bit 14 of the reply.

Formula
val
Range
0 to 1
Unit
No or yes

Confirmed for 2018. Supported for 2017.

Misfire monitoring enabled MIS_ENASAE J1979Confirmed

  • Request01 41
  • Service 01PID 41
  • Module7E0 → 7E8
  • Every1 s

Bit 15 of the reply.

Formula
val
Range
0 to 1
Unit
No or yes

Confirmed for 2018. Supported for 2017.

Start your test drive today.

Download Pelican on the App Store

See all featuresCompare plansJoin the beta crew

Keyboard shortcuts

jk/↓↑
Move down or up through a list or a grid.
hl/←→
Move across a row or between cards.
Enter
Open the focused link.
f
Open the current focus area's filter.
↓
In a filter, move to the first result.
Esc
Close a filter or a dialog.
?
Show these shortcuts.