Mazda CX-60

MAZDA_HPFP parameters

The Mazda CX-60 has 2 MAZDA_HPFP parameters.

● Confirmed◆ In testing○ Supported× Not supported

How to read a parameter card

High pressure fuel pressure desired MAZDA_HPFP_DESConfirmed

  • Request22 03 DC
  • Service 22DID 03DC
  • Module7E0 → 7E8
  • Every1 s
  • Testing

Example reply from a 2024 Mazda CX-60.

Bits 0 to 15 of the reply, 16 bits.

0x0258 = 600 → (600 × 1.450377397) = 870.226438 psi

Formula
(val × 1.450377397)
Range
0 to 3500 psi
Unit
psi

Confirmed for 2022 to 2024. In testing for 2025 to 2026.

  1. The parameter's name and its ID in the OBDb. Confirmed shows when a response from a real car confirms the parameter.
  2. The clutch mark shows a Connectable, a parameter that Pelican surfaces in its interface.
  3. The service and PID/DID asked for, the control module it's sent to, and how often Pelican asks.
  4. The reply's bytes. The parameter's bytes are blue. Bytes for other parameters in the same reply are grayed out. Hover over a byte to see the parameter it represents.
  5. Where the parameter is in the response, and how Pelican converts the raw value into a value.
  6. A real reply, decoded. The raw value comes first, then the reading.
  7. Which model years have tested this parameter.

High pressure fuel pressure desired MAZDA_HPFP_DESConfirmed

  • Request22 03 DC
  • Service 22DID 03DC
  • Module7E0 → 7E8
  • Every1 s
  • Testing

Example reply from a 2024 Mazda CX-60.

Bits 0 to 15 of the reply, 16 bits.

0x0258 = 600 → (600 × 1.450377397) = 870.226438 psi

Formula
(val × 1.450377397)
Range
0 to 3500 psi
Unit
psi

Confirmed for 2022 to 2024. In testing for 2025 to 2026.

High pressure fuel rail sensor voltage MAZDA_HPFP_VConfirmed

  • Request22 03 24
  • Service 22DID 0324
  • Module7E0 → 7E8
  • Every1 s
  • Testing

Bits 0 to 15 of the reply, 16 bits.

Formula
(val ÷ 204.6)
Range
0 to 5 V
Unit
V

Confirmed for 2022 to 2024. In testing for 2025 to 2026.

Keyboard shortcuts

jk/↓↑
Move down or up through a list or a grid.
hl/←→
Move across a row or between cards.
Enter
Open the focused link.
f
Open the current focus area's filter.
↓
In a filter, move to the first result.
Esc
Close a filter or a dialog.
?
Show these shortcuts.