Brake parameters

The Toyota Yaris Cross has 1 brake parameter.

● Confirmed◆ In testing○ Supported× Not supported

How to read a parameter card

Example reply from a 2025 Toyota Yaris Cross.

Bits 0 to 7 of the reply, 8 bits.

0x00 = 0 → APPLIED

States
Raw value	State	Meaning
`0`	`APPLIED`	Applied

Confirmed for 2025. In testing for 2020 to 2024, 2026.

The parameter's name and its ID in the OBDb. Confirmed shows when a response from a real car confirms the parameter.
The clutch mark shows a Connectable, a parameter that Pelican surfaces in its interface.
The service and PID/DID asked for, the control module it's sent to, and how often Pelican asks.
The reply's bytes. The parameter's bytes are blue. Bytes for other parameters in the same reply are grayed out. Hover over a byte to see the parameter it represents.
Where the parameter is in the response, and how Pelican converts the raw value into a value.
A real reply, decoded. The raw value comes first, then the reading.
Which model years have tested this parameter.

Example reply from a 2025 Toyota Yaris Cross.

Bits 0 to 7 of the reply, 8 bits.

0x00 = 0 → APPLIED

States
Raw value	State	Meaning
`0`	`APPLIED`	Applied

Confirmed for 2025. In testing for 2020 to 2024, 2026.