Pelican
Get the app

FIAT 500e

Movement parameters

The FIAT 500e has 1 movement parameter.

● Confirmed◆ In testing○ Supported× Not supported

How to read a parameter card

Drive motor speed 500E_EMOTOR_SPD_RPM

  • Request22 30 64
  • Service 22DID 3064
  • ModuleDA42 → 42
  • Every250 ms
  • Testing

Bits 32 to 47 of the reply, 16 bits.

Formula
(val − 20000)
Range
-20000 to 45535 rpm
Unit
rpm

In testing for 2020 to 2026.

  1. The parameter's name and its ID in the OBDb. Confirmed shows when a response from a real car confirms the parameter.
  2. The clutch mark shows a Connectable, a parameter that Pelican surfaces in its interface.
  3. The service and PID/DID asked for, the control module it's sent to, and how often Pelican asks.
  4. The reply's bytes. The parameter's bytes are blue. Bytes for other parameters in the same reply are grayed out. Hover over a byte to see the parameter it represents.
  5. Where the parameter is in the response, and how Pelican converts the raw value into a value.
  6. A real reply, decoded. The raw value comes first, then the reading.
  7. Which model years have tested this parameter.

Drive motor speed 500E_EMOTOR_SPD_RPM

  • Request22 30 64
  • Service 22DID 3064
  • ModuleDA42 → 42
  • Every250 ms
  • Testing

Bits 32 to 47 of the reply, 16 bits.

Formula
(val − 20000)
Range
-20000 to 45535 rpm
Unit
rpm

In testing for 2020 to 2026.

Start your test drive today.

Download Pelican on the App Store

See all featuresCompare plansJoin the beta crew

Keyboard shortcuts

jk/↓↑
Move down or up through a list or a grid.
hl/←→
Move across a row or between cards.
Enter
Open the focused link.
f
Open the current focus area's filter.
↓
In a filter, move to the first result.
Esc
Close a filter or a dialog.
?
Show these shortcuts.