Scion FR-SLight parametersThe Scion FR-S has 1 light parameter.● Confirmed◆ In testing○ Supported× Not supportedHow to read parameter cardsHow to read a parameter cardStop light switch FRS_STOP_LIGHT_SWITCHRequest22 12 30Service 22DID 1230Module7A2 → 7AAEvery1 sTestingBits 0 to 7 of the reply, 8 bits.FormulavalRange0 to 255UnitNumberIn testing for 2013 to 2016.The parameter's name and its ID in the OBDb. Confirmed shows when a response from a real car confirms the parameter.The clutch mark shows a Connectable, a parameter that Pelican surfaces in its interface.The service and PID/DID asked for, the control module it's sent to, and how often Pelican asks.The reply's bytes. The parameter's bytes are blue. Bytes for other parameters in the same reply are grayed out. Hover over a byte to see the parameter it represents.Where the parameter is in the response, and how Pelican converts the raw value into a value.A real reply, decoded. The raw value comes first, then the reading.Which model years have tested this parameter.Stop light switch FRS_STOP_LIGHT_SWITCHRequest22 12 30Service 22DID 1230Module7A2 → 7AAEvery1 sTestingBits 0 to 7 of the reply, 8 bits.FormulavalRange0 to 255UnitNumberIn testing for 2013 to 2016.
