Scion FR-S

Movement parameters

The Scion FR-S has 6 movement parameters.

● Confirmed◆ In testing○ Supported× Not supported

How to read a parameter card

Main accelerator sensor FRS_MAIN_ACCEL_SENS

  • Request22 12 79
  • Service 22DID 1279
  • Module7E0 → 7E8
  • Every250 ms
  • Testing

Bits 0 to 7 of the reply, 8 bits.

Formula
(val ÷ 50)
Range
0 to 5.1 V
Unit
V

In testing for 2013 to 2016.

  1. The parameter's name and its ID in the OBDb. Confirmed shows when a response from a real car confirms the parameter.
  2. The clutch mark shows a Connectable, a parameter that Pelican surfaces in its interface.
  3. The service and PID/DID asked for, the control module it's sent to, and how often Pelican asks.
  4. The reply's bytes. The parameter's bytes are blue. Bytes for other parameters in the same reply are grayed out. Hover over a byte to see the parameter it represents.
  5. Where the parameter is in the response, and how Pelican converts the raw value into a value.
  6. A real reply, decoded. The raw value comes first, then the reading.
  7. Which model years have tested this parameter.

Main accelerator sensor FRS_MAIN_ACCEL_SENS

  • Request22 12 79
  • Service 22DID 1279
  • Module7E0 → 7E8
  • Every250 ms
  • Testing

Bits 0 to 7 of the reply, 8 bits.

Formula
(val ÷ 50)
Range
0 to 5.1 V
Unit
V

In testing for 2013 to 2016.

Sub accelerator sensor FRS_SUB_ACCEL_SENS

  • Request22 12 78
  • Service 22DID 1278
  • Module7E0 → 7E8
  • Every250 ms
  • Testing

Bits 0 to 7 of the reply, 8 bits.

Formula
(val ÷ 50)
Range
0 to 5.1 V
Unit
V

In testing for 2013 to 2016.

Target engine speed FRS_TARGET_ENGINE_SPEED

  • Request22 11 21
  • Service 22DID 1121
  • Module7A2 → 7AA
  • Every1 s
  • Testing

Bits 0 to 15 of the reply, 16 bits.

Formula
(val ÷ 4)
Range
0 to 16383.75 rpm
Unit
rpm

In testing for 2013 to 2016.

Transmission turbine speed FRS_TRANS_TURBINE_SPD

  • Request22 12 98
  • Service 22DID 1298
  • Module7E0 → 7E8
  • Every250 ms
  • Testing

Bits 0 to 15 of the reply, 16 bits.

Formula
val
Range
0 to 65535 rpm
Unit
rpm

In testing for 2013 to 2016.

Turbine revolution speed FRS_TURBINE_REVOLUTION

  • Request22 11 CB
  • Service 22DID 11CB
  • Module7E1 → 7E9
  • Every250 ms
  • Testing

Bits 0 to 15 of the reply, 16 bits.

Formula
(val × 32)
Range
0 to 2097120 rpm
Unit
rpm

In testing for 2013 to 2016.

Turbine speed FRS_TURBINE_SPEED

  • Request22 10 CB
  • Service 22DID 10CB
  • Module7A3 → 7AB
  • Every250 ms
  • Testing

Bits 0 to 7 of the reply, 8 bits.

Formula
(val × 32)
Range
0 to 8160 rpm
Unit
rpm

In testing for 2013 to 2016.

Keyboard shortcuts

jk/↓↑
Move down or up through a list or a grid.
hl/←→
Move across a row or between cards.
Enter
Open the focused link.
f
Open the current focus area's filter.
↓
In a filter, move to the first result.
Esc
Close a filter or a dialog.
?
Show these shortcuts.