Pelican
Get the app

Toyota FJ Cruiser

Cruise control parameters

The Toyota FJ Cruiser has 1 cruise control parameter.

● Confirmed◆ In testing○ Supported× Not supported

How to read a parameter card

Cruise control speed FJ_CC_SConfirmed

  • Request21 21
  • Service 21PID 21
  • Module7E0 → 7E8
  • Every1 s
  • Testing for 2006, 2009, 2014

Example reply from a 2013 Toyota FJ Cruiser.

Bits 8 to 15 of the reply, 8 bits.

0x00 = 0 → 0 km/h

Formula
val
Range
0 to 255 km/h
Unit
km/h

Confirmed for 2007 to 2008, 2010 to 2013. In testing for 2006, 2009, 2014.

  1. The parameter's name and its ID in the OBDb. Confirmed shows when a response from a real car confirms the parameter.
  2. The clutch mark shows a Connectable, a parameter that Pelican surfaces in its interface.
  3. The service and PID/DID asked for, the control module it's sent to, and how often Pelican asks.
  4. The reply's bytes. The parameter's bytes are blue. Bytes for other parameters in the same reply are grayed out. Hover over a byte to see the parameter it represents.
  5. Where the parameter is in the response, and how Pelican converts the raw value into a value.
  6. A real reply, decoded. The raw value comes first, then the reading.
  7. Which model years have tested this parameter.

Cruise control speed FJ_CC_SConfirmed

  • Request21 21
  • Service 21PID 21
  • Module7E0 → 7E8
  • Every1 s
  • Testing for 2006, 2009, 2014

Example reply from a 2013 Toyota FJ Cruiser.

Bits 8 to 15 of the reply, 8 bits.

0x00 = 0 → 0 km/h

Formula
val
Range
0 to 255 km/h
Unit
km/h

Confirmed for 2007 to 2008, 2010 to 2013. In testing for 2006, 2009, 2014.

Start your test drive today.

Download Pelican on the App Store

See all featuresCompare plansJoin the beta crew

Keyboard shortcuts

jk/↓↑
Move down or up through a list or a grid.
hl/←→
Move across a row or between cards.
Enter
Open the focused link.
f
Open the current focus area's filter.
↓
In a filter, move to the first result.
Esc
Close a filter or a dialog.
?
Show these shortcuts.