Pelican
Get the app

Hyundai Santa Cruz

Battery parameters

The Hyundai Santa Cruz has 7 battery parameters.

● Confirmed◆ In testing○ Supported× Not supported

How to read a parameter card

12V battery state of charge SANTA_CRUZ_BATTERY_SOCConfirmed

  • Request22 E0 01
  • Service 22DID E001
  • Module7E0 → 7E8
  • Every5 s
  • Testing for 2021, 2026

Example reply from a 2025 Hyundai Santa Cruz.

Bits 48 to 55 of the reply, 8 bits.

0x50 = 80 → 80 %

Formula
val
Range
0 to 255 %
Unit
%

Confirmed for 2022 to 2025. In testing for 2021, 2026.

  1. The parameter's name and its ID in the OBDb. Confirmed shows when a response from a real car confirms the parameter.
  2. The clutch mark shows a Connectable, a parameter that Pelican surfaces in its interface.
  3. The service and PID/DID asked for, the control module it's sent to, and how often Pelican asks.
  4. The reply's bytes. The parameter's bytes are blue. Bytes for other parameters in the same reply are grayed out. Hover over a byte to see the parameter it represents.
  5. Where the parameter is in the response, and how Pelican converts the raw value into a value.
  6. A real reply, decoded. The raw value comes first, then the reading.
  7. Which model years have tested this parameter.

12V battery state of charge SANTA_CRUZ_BATTERY_SOCConfirmed

  • Request22 E0 01
  • Service 22DID E001
  • Module7E0 → 7E8
  • Every5 s
  • Testing for 2021, 2026

Example reply from a 2025 Hyundai Santa Cruz.

Bits 48 to 55 of the reply, 8 bits.

0x50 = 80 → 80 %

Formula
val
Range
0 to 255 %
Unit
%

Confirmed for 2022 to 2025. In testing for 2021, 2026.

Battery voltage SANTA_CRUZ_BATTERY_VConfirmed

  • Request22 E0 01
  • Service 22DID E001
  • Module7E0 → 7E8
  • Every5 s
  • Testing for 2021, 2026

Example reply from a 2025 Hyundai Santa Cruz.

Bits 32 to 39 of the reply, 8 bits.

0xC2 = 194 → (194 × 17.37 ÷ 255) = 13.214824 V

Formula
(val × 17.37 ÷ 255)
Range
0 to 17.37 V
Unit
V

Confirmed for 2022 to 2025. In testing for 2021, 2026.

Battery voltage after ignition SANTA_CRUZ_BATTERY_V_AFTER_IGNITIONConfirmed

  • Request22 E0 01
  • Service 22DID E001
  • Module7E0 → 7E8
  • Every5 s
  • Testing for 2021, 2026

Bits 40 to 47 of the reply, 8 bits.

Formula
(val × 17.37 ÷ 255)
Range
0 to 17.37 V
Unit
V

Confirmed for 2022 to 2025. In testing for 2021, 2026.

Control module voltage VPWRSAE J1979Confirmed

Power input to the OBD control module. VPWR is normally battery voltage, less any voltage drop in the circuit between the battery and the control module.

Pelican can show this parameter as the starter battery voltage.

  • Request01 42
  • Service 01PID 42
  • Module7E0 → 7E8
  • Every10 s

Bits 0 to 15 of the reply, 16 bits.

Formula
(val ÷ 1000)
Range
0 to 65535 V
Unit
V

Confirmed for 2023. Supported for 2022, 2024 to 2025.

Gasoline particulate filter charge state SANTA_CRUZ_GPF_CHG_ST

  • Request22 E0 09
  • Service 22DID E009
  • Module7E0 → 7E8
  • Every30 s
  • Testing for 2021 to 2024, 2026

Bits 320 to 327 of the reply, 8 bits.

Formula
val
Range
0 to 255
Unit
Number

In testing for 2021 to 2024, 2026. Supported for 2025.

Gasoline particulate filter inlet temperature sensor raw voltage SANTA_CRUZ_GPF_INLET_T_SENS_RAW_V

  • Request22 E0 09
  • Service 22DID E009
  • Module7E0 → 7E8
  • Every30 s
  • Testing for 2021 to 2024, 2026

Bits 256 to 271 of the reply, 16 bits. The bytes are in little-endian order.

Formula
(val × 21333 ÷ 4369000)
Range
0 to 319 V
Unit
V

In testing for 2021 to 2024, 2026. Supported for 2025.

Gasoline particulate filter outlet temperature sensor raw voltage SANTA_CRUZ_GPF_OUTLET_T_SENS_V

  • Request22 E0 09
  • Service 22DID E009
  • Module7E0 → 7E8
  • Every30 s
  • Testing for 2021 to 2024, 2026

Bits 272 to 287 of the reply, 16 bits. The bytes are in little-endian order.

Formula
(val × 21333 ÷ 4369000)
Range
0 to 319 V
Unit
V

In testing for 2021 to 2024, 2026. Supported for 2025.

Start your test drive today.

Download Pelican on the App Store

See all featuresCompare plansJoin the beta crew

Keyboard shortcuts

jk/↓↑
Move down or up through a list or a grid.
hl/←→
Move across a row or between cards.
Enter
Open the focused link.
f
Open the current focus area's filter.
↓
In a filter, move to the first result.
Esc
Close a filter or a dialog.
?
Show these shortcuts.